5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2021 Rebel Tow Hook opening cover

Pschne1

Active Member
Joined
Apr 7, 2021
Messages
28
Reaction score
14
Just had a BOSS HTX plow installed on my 2021 Rebel (no debate over plowing with a 1500 , please…) and the plow frame had to go where the tow hooks were, so they had to be removed and there are openings where the hooks used to be. The plow attachments are run through the left one, but the tight one is a gaping hole now…Does anyone have the part numbers (if it exists) for a cover for the opening? I searched online, but no luck so far.

Thanks for your help!!

-Pete
 

jchurchbrah

Member
Joined
Oct 21, 2021
Messages
13
Reaction score
7
Location
Mid Michigan
Just had a BOSS HTX plow installed on my 2021 Rebel (no debate over plowing with a 1500 , please…) and the plow frame had to go where the tow hooks were, so they had to be removed and there are openings where the hooks used to be. The plow attachments are run through the left one, but the tight one is a gaping hole now…Does anyone have the part numbers (if it exists) for a cover for the opening? I searched online, but no luck so far.

Thanks for your help!!

-Pete
Greetings Pete, should be

68414296AA​

according to my research. Just confirmed out side on my truck. Also confirmed it fits the Rebel as well on mymoparparts website.

Take care
 

Attachments

  • 64B62D8F-A92B-4B6B-BB25-B064A5A0E7E5.jpeg
    64B62D8F-A92B-4B6B-BB25-B064A5A0E7E5.jpeg
    204.5 KB · Views: 15

Pschne1

Active Member
Joined
Apr 7, 2021
Messages
28
Reaction score
14
Greetings Pete, should be

68414296AA​

according to my research. Just confirmed out side on my truck. Also confirmed it fits the Rebel as well on mymoparparts website.

Take care
Thank you! I ordered that part and it is close, but the top inside corners are different and it is wider (see attached pictures). I ended up fabricating a back for the bezel that I had. Not perfect, but good enough.
 

Attachments

  • 17DEFF28-802C-4D87-B000-98FD9F93EFF6.jpeg
    17DEFF28-802C-4D87-B000-98FD9F93EFF6.jpeg
    100 KB · Views: 22
  • 737B88DD-F57B-4500-AFFE-6F884FF4871A.jpeg
    737B88DD-F57B-4500-AFFE-6F884FF4871A.jpeg
    113.2 KB · Views: 23

Users who are viewing this thread

Top