The truck would not turn off when ignition button pushed. I had to pull the PCM fuse. Then the truck would not start. But would start with the remote. But I cound not put it in thr run mode by pushing the ignition button. Seems to me the problem is the switch or the ignition control module. Anyone with same problem? Any insight?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2021 Ram 1500 5.7 Larame
- Thread starter Truegrit
- Start date
- Joined
- Jun 8, 2021
- Messages
- 5,413
- Solutions
- 1
- Reaction score
- 10,410
- Points
- 113
Sounds like the switch to me. If it was anything else, it wouldn’t remote start.
Got a buddy with a 1509 DT? You could try swapping PTS buttons to see if that’s the culprit. It’s pretty quick and easy to do.
Got a buddy with a 1509 DT? You could try swapping PTS buttons to see if that’s the culprit. It’s pretty quick and easy to do.
