2020+ ram 1500 ecodiesel

[Whitetail Diesel]

It'll drop a code, usually P0671- P0676 to indicate which cylinder is faulting. As well when you first startup in the cold the little "Coil/Glow Plug" light will flash for the first 10 seconds of running. you can hear the truck misfiring just a hair too for the first 20 or so seconds of running as the other cylinders are warmer and burning their fuel better. I don't always use my block heater, where I live doesn't stay cold enough to warrant plugging it in every night. I'd say I probably only plug it in 50% of the time in the winter.

Okay, Thank You

 

[Whitetail Diesel]

Coming up on 127k. Just now having some issues, I’ll be replacing intake manifold for stuck swirl valves. Other than that it’s been solid and any issue I was starting to have was addressed with a recall. Stock, no fuel additives. I have a diet ready to go, just need to install it. Maybe come spring I’ll get it going.

Do you use any oil/fuel additives for your truck?
Did you ever clean the EGR or Map sensor
What kind of manifold will you get?
I see Dorman makes on for the 3rd GEN

 

[Whitetail Diesel]

Coming up on 127k. Just now having some issues, I’ll be replacing intake manifold for stuck swirl valves. Other than that it’s been solid and any issue I was starting to have was addressed with a recall. Stock, no fuel additives. I have a diet ready to go, just need to install it. Maybe come spring I’ll get it going.

I been running hot shots secrets for everything. Lx4 everyday fuel treatment and winter anti gel treatment.
Diesel extreme is suppose to help get rid of some of the soot/sludge. I pour that inside my truck every 3,000 miles.

 

[Whitetail Diesel]

Did anyone install a Dorman 615-311 on there ram EcoDiesel GEN 3 ?
Its much cheaper then a OEM intake manifold just wondering if its better/stronger then the OEM intake manifold.