JWard2020
New Member
- Joined
- Feb 21, 2021
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Age
- 41
I hope i'm not beating a dead horse here, but i'm having some issues and looking for someone who may have had this same issue and what they did to fix it. So i purchased and installed the OEM LED Cargo Bed Lights. i know about the wrong pin issue and i made sure the BG/VT wire went into the proper PIN 16. I took it to the dealer and they programmed the BCM with the sales code. However the technician or myself can seem to get the lights to do anything. The ground is solid, i conducted a continuity test. C1 Pin 5 and C7 Pin 16 were de-pinned and re-pinned with the new wires. Still no joy. if anyone could shed some light on the situation, it would be gratefully appreciated.