I want to remove the center stack in my truck, that has the 12" screen (I've read about something similar here https://5thgenrams.com/community/at...k-removal-wireless-charger-install-pdf.27560/).
I've removed the two torx screws on the top and tried getting my fingers/trim removal stick under the bottom and sides of the stack, but it won't budge. Just wondering if there are any other screws holding the 12" screen stack in?
My 2011 Ram 2500 had the same two torx screws on top with a third screw behind a trim piece where the 110 plug was. Three screws out, a bit of pressure, and the stack popped off.
Hopefully someone can shed some light, I really don't want to break anything - I just bought the truck and would cry like a baby if I did
Great site by the way!
I've removed the two torx screws on the top and tried getting my fingers/trim removal stick under the bottom and sides of the stack, but it won't budge. Just wondering if there are any other screws holding the 12" screen stack in?
My 2011 Ram 2500 had the same two torx screws on top with a third screw behind a trim piece where the 110 plug was. Three screws out, a bit of pressure, and the stack popped off.
Hopefully someone can shed some light, I really don't want to break anything - I just bought the truck and would cry like a baby if I did
Great site by the way!
