2.5" motofab lift w/Mopar lift ucas

[bradster285]

I did the Motofab 2” level with the Mopar 2” lift UCA on my Rebel. About 2500 mi. on this setup with 295/70-18 Nitto’s and no problems. No difference in ride quality, rides same as stock.

Do you have part numbers for the Mopar UCA?

 

[Yates367]

Do you have part numbers for the Mopar UCA?

Are these the part numbers you used?

Arm Left-Hand-Upper Control
Part #68323531AA

Arm Right-Hand-Upper Control
Part #68323530AA
$49.34

I have the North Edition with the 1" factory lift, supposively the same s the Rebel base suspension. I am hearing mixed things of them working and not working with the Rebel/North Edition ORP package.

 

[QuasarZ]

Did you notice anything different from the UCA you took off vs the new one?

 

[rceagle1a]

Id have to look but it gives you 2.5" unlike alot of other ones.

The MotoFab 2.5 leveling blocks are 1-9/16 thick.

 

[rceagle1a]

These were the after pictures

 

[rceagle1a]

These were the uca angles with tires off

 

[rceagle1a]

And with tires on at ride height.

 

[DonsRam19]

And with tires on at ride height.

Does it ride good? The angle of the uca don't look bad at all

 

[rceagle1a]

Does it ride good? The angle of the uca don't look bad at all

It rides a little rougher but not bad, didn’t really affect alignment bad either.

 

[DonsRam19]

I got my ram lifted with the 2.5" motofab spacers and the angle wasnt even bad so they tolde not to even worry about the Mopar uca's.

 

[DonsRam19]

 

[Fonzi89]

I just bought the motofab 2.5" front level spacers for my 2020 Laramie night edition and was not planning on adding an aftermarket UCA along with it. After reading everyone's comments, it makes me think that I should go ahead and add it with the level. Was not planning on spending the additional $400+and pairing that with my indecisiveness I don't know what to do!

 

[Fonzi89]

I got my ram lifted with the 2.5" motofab spacers and the angle wasnt even bad so they tolde not to even worry about the Mopar uca's.

This helps LMAO

 

[DonsRam19]

This helps LMAO

LMAO

 

[Stew81]

View attachment 30883View attachment 30884

Nice looking truck! I'm thinking about a very similar setup but I was going to go with a 33" tire. Are you rubbing with these 35"tires?

 

[DonsRam19]

Nice looking truck! I'm thinking about a very similar setup but I was going to go with a 33" tire. Are you rubbing with these 35"tires?

I didn't at first but now at full lock in reverse I scrub a little. Not bad at all with the 11.50's