tailhook31
Member
- Joined
- Sep 9, 2019
- Messages
- 10
- Reaction score
- 5
- Points
- 3
- Age
- 57
Went with 2.5'' Motofab for the front. I wanted it up a bit in the back so i bought some ZY 1.5'' lower spacers, Put them in the lathe and took off about .400 they hit the factory spring rings by about 1/16'' so i took off that off the spring rings with grinder. If your looking for rear lift go with the top spring spacers and you can get any size. Just more money, Truck rides fine no rub with 295/70-18. Truck sit about 1-1/4'' higher in the rear. 2019 bighorn/No air or ORP 
