5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

2.5 Motofab Level And 1'' Rear Lift


Sep 9, 2019
Reaction score
Went with 2.5'' Motofab for the front. I wanted it up a bit in the back so i bought some ZY 1.5'' lower spacers, Put them in the lathe and took off about .400 they hit the factory spring rings by about 1/16'' so i took off that off the spring rings with grinder. If your looking for rear lift go with the top spring spacers and you can get any size. Just more money, Truck rides fine no rub with 295/70-18. Truck sit about 1-1/4'' higher in the rear. 2019 bighorn/No air or ORP 20191214_REAR1.jpg

Users who are viewing this thread