2/4 or 3/5 lowering kit?! I can’t decide.

[Stankbrown926]

Can I please get some pictures of both, a 2/4 drop vs 3/5 drop.


Sent from my iPhone using Tapatalk

 

[stevj]

Let air out of your tires to give the front and rear drop you want.
There you go. You can see how it looks.
Now air your tires back up.
Not so hard.

Steve

 

[Rock Crawler]

2/4

Actually, mine is not a kit, so I don’t really know the exact drop. All four points are adjustable. I’m probably somewhere between 2/4 and 3/5. I’m sitting at 33.5” from fender to ground on all four.




Check the suspension section. There are quite a few drop threads there. Here are a couple.

Thread 'Lowered 5th gens?'

Dec 24, 2021

I always see threads about leveling and lifting but very rarely do I see any lowered threads. I had a 11 Bighorn that I leveled but I brought the rear down to meet the front so it was about 2 inches. I love the look of lowered 4th gens but I havent seen many 5th gens. I have a 21 BTS that has the ORP which sits slighly higher than normal but it's got me thinking about going low instead of high. If you have any pictures of your LOWERED 5th gen can you post some pictures with a description of your mods? Thank

• Rlaf75
• Replies: 194
• Forum: Suspension

• 

Thread 'Post your lowered 5th gens'

Apr 14, 2022

Like the title says. I want to see everyone’s lowered 5th gens.

Post a picture and a description of your setup!


Maxtrac 2/4
Bilstein 5100 rear shocks
Spohn adjustable panhard bar
Hellwig sway bar and end links
Core 4x4 rear lower control arms

• Mopar_maxi
• Replies: 70
• Forum: Suspension

•