2” level with rims and tires

[Swientek10]

Just wanna know what some people did for rims and tires with a 2 level added to the rebel, or a 3.5. Currently looking and just want to get to know proper sizing so I don’t have to trim or no rubbing etc. Thanks
Post pictures !

 

[NorthCountryEvo]

Not to be that guy, but great resources to be found here:

Wheel and Tire Overview

The Mods have stickied this thread so that users can share their results with aftermarket rim, tires and lifts. Members please share your results and I will add them to this top thread for a comprehensive post. Note: I am a wheel and tire rookie! If you see an error in my post, or something...

5thgenrams.com

How to: modify wheel wells for larger tires/Negative offsets

Snapped some pictures while modifying the wheel wells today to fit my 35x12.50x20 on a 20x10 -18 offset. Lift kit is a ReadyLift 3.5 SST A lot of people ask do they Rub? Answer is Yes, solution is easy since it’s minimal labor. Tools needed: Wet towel 8mm socket Grinder Spray paint Heatgun...

5thgenrams.com

Suspension

For discussions relating to the suspension

5thgenrams.com

 

[UglyMutt]

with a 2 inch level I was told by several people at the 4x4 stores and the dealership I can put 35x12.5 on the truck with 18x9 rims with a 5in backspace and will have no rub... this what I am told, have not done this mod yet, I have a 2inch level but am waiting for my 33 inch wranglers to wear out, got about 40k miles to go then I will get rims and 35's .