'19 RamBox crossbar/rack options

[Imp0ster]

Are there any options at all for crossbars with the RamBox/Track system? A Nutzo rack is out of the question and at this point I feel kinda screwed by the RamBox setup. It pretty much eliminates any common bed rack system in production and forces you into expensive customization. I carry two custom SUPs and would like to utilize the bed for accessories and carry the SUPs on a rack at bed rail level. The pillar gripping roof rack is out of the question since it just destroys the paint. Crossbars would give me the option to carry my bike and a basket like I wanted in the first place. I feel like I made a terrible mistake with the RamBox

 

[Imp0ster]

Since I didn't get one reply here's what I'm going to do. I'm going to buy 4, 1x1", .083 wall aluminum box stock(linked below), bolting two together after cutting to length and adding tube plugs to the ends. I'll drill through the top and down through an existing hole in the track and through bolt using 1/4-20 stainless and wing nuts. This will be good for about 400lbs. I plan on putting my Thule SUP carrier on it and also mounting boat seats with tracks to the rails when I go to the beach so the girl and I can watch the sun drop while drinking frosty beverages in comfort. This is a simple solution to a very, very stupid problem.

Amazon.com: Unpolished (Mill) 1008-1010 Steel Square Tube, 1" Square Tube, 0.083" Wall Thickness, 0.0834" Inner Diameter, 4' Length: Industrial & Scientific

Amazon.com: Unpolished (Mill) 1008-1010 Steel Square Tube, 1" Square Tube, 0.083" Wall Thickness, 0.0834" Inner Diameter, 4' Length: Industrial & Scientific

www.amazon.com

1 Inch Square Tubing End Caps (20 PK) (10-14 Gauge for Thicker Wall Tubing) Plastic Plugs/End Caps/Plastic End Caps/Plastic Plugs for Square Tubing/Black Plastic Square Plugs: Amazon.com: Industrial & Scientific

1 Inch Square Tubing End Caps (20 PK) (10-14 Gauge for Thicker Wall Tubing) Plastic Plugs/End Caps/Plastic End Caps/Plastic Plugs for Square Tubing/Black Plastic Square Plugs: Amazon.com: Industrial & Scientific

www.amazon.com

 

[theonlyMcG]

Somewhere else on the forums someone used these. It looks like they work with the cargo rails if you have the BUG rails.

https://www.amazon.com/gp/product/B002MZSON6/ref=ox_sc_saved_title_1?smid=ATVPDKIKX0DER&psc=1

Then you can add Inno's bars. I think the 46" will work but they also have 50". Haven't measured myself so I would double check. That should give you a rack setup.

Amazon.com : INNO IN-B117 Square Cross Bars for Rooftop Racking Systems - 46-Inch (1 Pair) (Black) : Bike Car Rack Accessories : Sports & Outdoors

Amazon.com : INNO IN-B117 Square Cross Bars for Rooftop Racking Systems - 46-Inch (1 Pair) (Black) : Bike Car Rack Accessories : Sports & Outdoors

www.amazon.com

 

[Imp0ster]

thanks for listing an option. I'll still go with my idea since they want $160 for a steel bar setup but at least people searching have what you linked as a available solution!

 

[FL Laramie]

Would you mind uploading some pics? Warm weather is coming up here in N FL. I would like to rig something up to haul the bikes around. Thanks for the links and idea.

 

[Dragon_RAM]

Second request for some pics of what you’ve done. I’m trying to get crossbars to fit into the t-slots on the slide rail myself but am of the opinion I’ll need to make it myself.

 

[Maritimer0021]

Anyone come up with anything here? I’d also like to buy crossbars to work with the BUG rails.

Currently looking at the Inno bars, but uncertain what size to get. Ideally, I can install them and still use my tonneau cover when not in use.

Any pics or responses would be appreciated!


Sent from my iPhone using Tapatalk

 

[zj4x4]

I went with the American Roll Cover with the Yakima rails and added crossbars and a rack.

 

[Maritimer0021]

I went with the American Roll Cover with the Yakima rails and added crossbars and a rack.

View attachment 134389
View attachment 134390

That’s a nice set up! I was hoping to somehow not spend the cake for a new tonneau too, but seems I’ll have to.

What did that entire set up run you?


Sent from my iPhone using Tapatalk

 

[UNSAFE]

I went with the American Roll Cover with the Yakima rails and added crossbars and a rack.

View attachment 134389
View attachment 134390

What crossbars did you use?

 

[SD Rebel]

This one seems pretty awesome..