18" wheel thread-Lets see your aftermarket set up!

[Cr250Ram]

I have been searching without much luck. I really want aftermarket 18" wheels with stock tire size but it looks like some aftermarket 18" wheels don't fit due to the larger brakes on the 19s. Please post pics and/or stats about your aftermarket 18" wheels (include offset/backspacing) and any fit issues, and clarify if your suspension is stock, level, lifted... LETS SEE YOUR SETUP!

 

[Cr250Ram]

Dang, nobody???

 

[Bigtone]

I went the cheap route. I put a set a wheel skinz over the stock 18" wheel on my Laramie. Couldn't be happier.

 

[BigSkyJK]

Stock suspension. Fuel Vapors, 18x9 +1 offset. Put these on my 2019 Rebel stock duratracs. The +1 offset puts the tires exactly flush with the fender flares. I'm going to mount Blizzaks on the stock wheels for Winter.

 

[Cr250Ram]

I went the cheap route. I put a set a wheel skinz over the stock 18" wheel on my Laramie. Couldn't be happier.View attachment 33008

Thanks for sharing!
Those turned out good! What are wheel skinz? Is it durable and available in black? Cost if you don’t mind me asking?

 

[Cr250Ram]

Stock suspension. Fuel Vapors, 18x9 +1 offset. Put these on my 2019 Rebel stock duratracs. The +1 offset puts the tires exactly flush with the fender flares. I'm going to mount Blizzaks on the stock wheels for WinterView attachment 33016.

Those look great! I love Fuel wheels! I actually want to get some Fuel wheels for mine, and it’s actually the reason I’m asking for people to share. I am leaning towards their “Throttle” wheel, and I also want to move my stick tires to them. This gives me hope!

 

[Bigtone]

Thanks for sharing!
Those turned out good! What are wheel skinz? Is it durable and available in black? Cost if you don’t mind me asking?

They seem as durable as the clad wheels my last 2 Rams had, except you can remove these if you want to. I'm impressed as to the quality, but I have only had them on for a few months. Best part is the price, around $100.

 

[OC.13]

Been following this thread, hoping other will post up there setups that actually clear the calipers in an 18 inch aftermarket wheel. I like a little more sidewall, and won't lift the truck higher then level. I saw on another thread someone getting 35s on a 18 inch rebel wheel with stock suspension. It looks awesome. Not exactly the wheel I want, but hoping to see what others may be useing.

 

[ironking]

Subbed

 

[tobyw]

Fuel Trophy D551, 18x9, +1 offset with 305/65R18 BFG's:

 

[Whiskey_tango]

Fuel Trophy D551, 18x9, +1 offset with 305/65R18 BFG's:

View attachment 39932

View attachment 39933

View attachment 39934

IMO I think you nailed the stance right there.

 

[Racer 74]

4 1/2 “backspace.. 11.5” tires remain inside wheel well. Side of Truck appreciates this

 

[Al Czervik]

Well... mine isn't technically "aftermarket" either, but for now I'm rolling (literally) with stock 19.05 offset Laramie wheels, powder coated gunmetal, shod with 275/65/18 Cooper A/Ts, bumped out with 1.5" Bora spacers:


(please excuse crappy enlarged & cropped cell phone pic showing stance)

 

[Huskymush]

Wheels: 18x9 0 offset
Spacers: 1.25" in the front 1.5" in the rear
Tires: 305/65r18
Fitment is great. Only rub in entry/exit on full lock.
Decided to run spacers to even out the wheels with the Bushwhacker fender flares. Would have done a custom offset but got the wheels before the flares.View attachment 39002View attachment 39000View attachment 39001