Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
There is an option to start with a set light show, and cycle them from there. Also the shortcut allows you to activate the lights by pushing a couple buttons simultaneously, without having to go into the setup menu.
It sounds like you would benefit from setting up a custom light show which is...
Yes the rear light bar is connected to my hitch lights. The tazer does not use those lights in the lighting sequence. Any other lights connected to taillights etc will flash if you have them selected to flash.
I am trying to find a good acc and 12v wire inside the cab. I am trying to hardwire my dashcam and don't really want to run the wires through the firewall and up to the fuse box. Any help locating a couple sources would be great I just thought I would reach out before testing every wire I can find.
I installed a set of 275/60/20 cooper discoverer at3 4s on my 2019 bighorn, stock height, stock wheels. It will rub at absolute full turn. Just barely but enough to hear it for sure.
Honestly if you were a good electrician and knew exactly which resistors to use to prevent backfeed you could just tap a brake wire and a turn signal merge them into one and wire it to the appropriate side of the blade. But I'm not savvy enough to know what size resistor I would need to prevent...
Thanks for checking this. I was going to call today. I was wondering what would happen if you just put a jumper wire between the tail light signal while it was still wired into the trailer. I would just be worried how send that electric backwards through the wires would effect things.
Do the turn signals and brakes work off of the same wire? I had my putco 60" fully installed. Got tired of the delay. Took everything apart, then realized I don't have enough wires coming from the light bar to wire everything. No matter how I did it I didn't have brakes if I had turns. And I...
Finally got my tazer light show short cut to work. Although it's nothing like its suppose to be. I also have mine set up for in motion working. But all I do is when the cruise control is off, tap the cruise "res" button and it activates
Most of my issues were fixed with the new firmware update. Lights are working correctly now. Only issue I have now is getting the shortcut option to work. Here are my three custom shows. One for rear only lights, one for front only, and one combination. I'll have to upload the screen shots of...
Don't know about everyone else but I cannot get the custom light shows to work like they're supposed to. for example when I choose the high beams and low beams to flash any custom lightshow and then hit test they will not flash at all. This is after I have already saved the file to make sure...
Anyone with custom light shows they would like to share yet? Just got my tazer today. Truck is in the shop so I can't play with it but figured I could mess with the program options.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.