Search results

Had an appt to get the pump replaced. They didn’t have the parts when I came in for the appt so I said keep the truck till you do. That took a month long for them to actually get the parts.

After leaving my truck for a month at the dealership, my fuel pump has finally been changed out. Good luck to the rest.

Took my truck to the dealer after having it scheduled so they could order the parts and have them available. Well as others have stated, no parts yet but they should be there first of next week per them but bot holding my breath. Left my truck at the dealer for the time being.

Appreciate that but no ORG in my build. Switched to the Rebel night edition wheels/tires and like it even more now.

It works with the factory soft cover so don’t see why it wouldn’t.

When I added trailer tpms to our truck it added the trailer light check. I also did not want the reverse steering knob on the dash when we ordered.

Weathertech makes mudflaps that fit OE fender flares. You’ll have to reorder that type after adding the flares. We have them on our limited.

Read through this post and you’ll see that it can be done. I did it and it works perfectly. https://5thgenrams.com/community/threads/trailer-tire-pressure-monitoring-system.28078/

Here’s my install and maybe the pics help clear up what you’re wanting. https://5thgenrams.com/community/threads/2021-air-ride-leaving-kit.29152/page-3#post-428016

This person did it. https://5thgenrams.com/community/threads/bed-step-with-multifunction-split-tailgate.14612/page-5#post-374285

That is the correct part number. Plenty of times pictures shown for reference on parts are not how they actually appear. In regard to the the jumper cable, I did have an existing one also that will not connect to the module. Go back and compare pics of my earlier post and look at the connector...

Connect to Bluetooth but don’t stream anything.

Have you not seen Jurassic park?? Dinosaurs are waaaaaaaaaay fast.

I was referring to the clips attached to the framing that holds the main harness in place near the bumper.

If you reach down from the top and behind of each side rear seat, you’ll feel a small cable that you’ll want to pull sideways (I believe toward the passenger side) and it will release the lock for the seat back to fold forward some. You’ll just want a good pry tool to separate the clip from the...

All parts came apart easily when pressing the release to each clip. If you’re referring to the tabs that hold the connector to the body, I just used a pry tool which is used on securing pin removal.

No need to remove any part of the seat. You could literally get to the connector below the seat or just release the seat backs to fold forward.

Here is the other pic earlier in the post. You can see the plugs I pulled out on the ground albeit blurry. They are just held in with friction.

I just used a pick. They are just pressed in there and come right out. Ha Jimmy beat me to it….was using my same pic even. He’s the master of this type of stuff.

Same truck that we got in March so thought I’d give you more of a comparison. 1. Our sport hood badges seem secure and solid. 2. HUD is secure. Slightly raised in back left corner but due to leather dash maybe. Doesn’t stand out. 3. Dash badging seems perfect. 4. No uConnect issues so far...