Search results

82216449AB Is the switch kit with relay box.

The Weigh Safe hitch is the easiest to set up of any hitch I've had any experience with. You can adjust the tension with everything hooked up. So you can dial it in exactly..

Grand Design Imagine 3250BH 10,200 gross weight 32 ft box 36 total ft truck is an e-torque hemi with 3.92 gears and air bags.. Use a Weigh Safe hitch pulls is nice..

We just bought a new 3250Bh Grand design Imagine it pulls great in tow haul never had any issues. Has about a thousand miles on it so far. Love the engine braking aspect.. Truck is an E-torque 3.92 gears..

Yes I'm using crm's, factory air line, factory air tank, I've fabricated brackets to fit the spring pockets ( crm's ) as far back as 2009 on alot of my rams and they've always rode better then stock. I bought and sold cars back in the day so I pulled a steel floor 20ft car hauler quite a bit and...

I'm running Maxtrac front struts set at 3" in this pic the rear is IHC control arm relocators and IHC springs trimmed down Maxtrac track bar bracket. I'm currently changing it up and adding front air struts IHC 4" drop control arms and Timber grove rear 7" bag kit..

The trim pieces and grille are different configuration. I you had a Lonestar and wanted Laramie lights you just change the headlights. If you want Limited headlights you have to change it all up they have different lines the Limited headlight housings are smaller..

Everything fit just like factory no issues. The part numbers depend on what you want.

Ok you may need to find another connection my truck is a Lonestar level 2 so it had the ambient lights under the dash that stay on at night. I tied into them after I figured out I could change to the 2 wheel headlight switch pretty easily. I think it was 2 changes in alpha. I just searched...

Really odd I had originally installed the limited wheel and noticed it had an extra connector. I didnt worry about it as I did not want to remove the steering wheel again. I turned on the heat and everything heated up except the top wood section. I figured out that the airbag harness I had in my...

I didnt realize there was a write up nice..

I used this harness 68340400AD clipped the connector thats different and hard wired it to the led light under the dash above the foot pedals. The harness has four connectors three of them are the same those three are for the lights they are plug and play the fourth one will have to be cut and...

Doesnt look like you do. You can add the switch with the two rollers and the lights like I did. I programmed mine with alphaobd..

That is the correct part number and yes the price is crazy. I did that conversion on my Lonestar as well. Do you already have the heated steering wheel option? If you do you'll need the air bag harness so the top of the steering wheel heats up too.. The limited has one more connector then the...

Yes sir the only difference from your truck is the headlights, grille when you get the grille you have to get the grille extensions, and the painted pieces under the headlights..

They won't but Jimmy can make a wiring harness so you can add the adaptive module to make it work..

You have to switch the grille, headlights, fender extensions under the headlights, grille extensions, and wiring if you dont already have factory led headlights.. Also you have to add factory or other fender flares because of the holes for the flares in the new fender extensions..

Im hoping mine will go lower. The factory system I'm guessing is not releasing the pressure to zero. I will have an aftermarket air controller made by Accuair..

I did the Limited upgrade my truck is a lonestar pretty simple just have to get the pieces painted I painted them myself...

Not sure on the 21's but some Laramies I've seen in the past had the connectors but the lights themselves werent there. So they order all 3 light housings and installed them without issue. easiest way to check is to pop out the drivers air vent and check to see if the connector is taped to the...