Search results

I got my Uconnect updated and have the pages showing up correctly, but looks like my 2020 Bighorn doesn't have the pitch/roll/steering sensors installed as they continuously just show 0 degrees for all of them. Is this how yours is functioning as well?

I have a 2020 1500 with the power fold standard mirrors. Now that the 2021 models have available power folding tow mirrors, has anyone tried to swap the 2020 power fold standard mirrors for the 2021 power fold tow mirrors?

Hi all, So I rented a 20ft travel trailer for the weekend and when I drove it home I found that the blind spot monitors didn't extend any farther than usual even though in my UConnect had it set to Max length. I never got the little icon in my dash either but I know the truck is sensing the...

Thanks for your response. I ended up getting it working just now by splicing in the relay. I did it slightly differently than you suggested but along the same idea. I just cut off the existing fog light connector and wired the ground to relay ground, and the positive on the fog light to the...

Hey all, I've tried doing some searching on this forum and research around the web but can't find an answer to my problem. I replaced my bumper so lost the factory halogen fog lights in that process as they were not compatible with the new bumper. I got 2 Rigid SAE/DOT LED Cubes to use as my...

Hmmm, well I already had fogs in my previous bumper so the wiring is all there, it's just that the LED cubes have a different connector than the 9006 connector. I found a 9006 to Deutsch connector so I'm going to try it. The cubes pull way less power than the previous fogs so don't think it'll...

This was a fun weekend. Installed the Readylift 3.5" SST, swapped for a Body Armor Ambush series front bumper, and put on 35x12.50x20 Ridge Grapplers on Fuel Vapor 20x9 +1 wheels. Added some nerf bars so the lady can still get in... Finally feels like a truck. Now to just get a light bar and...

Any reason you went with the 11.50's instead of the 12.50's? Were the 12.50's going to rub? I'm wheel hunting right now for Fuel wheels that will give me the same tire poke that you have but I'm looking to stick with the 12.50's...

Did they end up rubbing at all or requiring any trimming?

Hey all, I can't find anything definitive in the search so hopefully someone can give me a confirmation one way or another based on experience. I'm installing my Readylift 3.5" on my 2020 Bighorn Night Edition this coming Saturday and have an appointment for Sunday to swap out the tires but...

Did you buy something else? If so, curious what?

That was kind of my point. I don't think it necessarily equates to any real world improvement in acceleration or 0-60 times, but if it is actually able to open the throttle body faster than stock as it shows in the video, then it is doing what it is claimed to do and leads to the "massive...

I think video shows it a little better and is on the v3. Shows that it's not just remapping your pedal, but it actually opens the throttle body faster. Allegedly... It's one thing for them to show it on a display meant to showcase this ability, but I'm curious if it actually functions that way...

Where'd you get the LED housings from and how much you pay? This is definitely going to be one of my next mods after my lift.

I'm kind of surprised to hear about all the issues with the LED conversions, especially for the 3rd brake light. I just bought a random set off amazon and I guess was lucky to not have any issues. The ones I got are below (not sure if I can actually share links?) 921 LED's

What shade of Lamin-X did you use on your tails?

There is also the ConsoleVault which I had in my F150 before and never had any issues with. Running $269 for either a key or a 3 digit combo lock. I haven't gotten around to ordering for my Ram yet but will likely go this route when the time comes. If you have a Limited or Longhorn you probably...

Ya there is a How-To thread that I followed. https://5thgenrams.com/community/threads/adding-passive-entry-how-to.22274/

Replaced my front driver & passenger door handles to finish up my mod to add passive entry to my Bighorn. I did all the hard work a couple weeks ago but had accidentally purchased the handles with the chrome strip instead of just the body color handles so was rocking a single chrome strip on...

I was able to manage it without taking off the entire panel, but I still removed all the exterior bolts along with the 2 bolts inside the panel to give it a little more wiggle room. I rested it on a 5 gal bucket while I worked around the side but didn't detach the entire wiring harness.