Search results

I read through this thread and figured it out from there. There is an infotainment video on YouTube that can get you down the road. But infotainment sends a specific BCM programmer. But look through the thread it is all here

Yes I am running it now

thank you sir! that makes sense on the caps.

two cosmetic questions. are the front a rear handle the same on a crew cab? are the new Caps necessary Or are the part number listed incase someone breaks theirs or is swapping from a one color to another. And the old one already on the truck would work? I just ordered the harnesses from...

Sorry I just now saw this, but the video GeorgF put up should answer all the questions.

pin 3 and 4 go to the grey plug matching wire color as labeled above and pin 1 an 2 go to the black plug. also matching wire color. 1 is light blue w/brown stripe, pin 2 it light blue w/orange stripe. 3 is pink with light green stripe and 4 is black they are easy to find once you peal back all...

Harness for connecting the Cabin sensor in a single set up application you will have to tap into 4 wires on the AC controller 2 in gret plug and 2 in the black.

just finished doing it last weekend, works great, accept for it is only a single zone automatic not a dual zone. In order to go dual zone, there is a lot of modification to the ac system gotta add mode doors and etc.

best I have found was 223 shipped granted it can be in the shipping where did you find both pcs for 211? splitting hairs I know

Confirmed it works! just swapped my manual single to auto single (dual but really single). I did have to modify the controls a touch. this set cam with heated steering wheel and heated and cooled seats. Well i didn't want to see the buttons so I removed them and put the blank off my manual...

FM 45. Thank you for this. Is there any info on if we activate the dual zone in the BCM without the control addition but with the sensor additions if the ac controls will come up on the non nav 8.4.? And function?

interested. I know this was 10 months ago but I am looking to do this. too.

You ever get an answer?

Yes it shows up, but always gives a error or says it did not complete the cycle and doesn't change anything. App seems to lock up for second and then flips to the unsuccessful screen. I tried multiple times thinking, like a couple videos I watched on it, that unsuccessful report doesn't...

I did! Using the 4th gen net. I tried the 19 net and the 20 net but was able to using the *-18 net. It took a couple tries but rolled the mileage right where it was programmed. Thanks for the heads up I will drop Alexey a line to see if it in on the list yet or not. Appreciate it.

okay CD player and RAM Qi charger installed. ALfaOBD was required. but it was simple, showed up after the "key Cycle", all was good. Qi changer works great, added Airplay 2 usb module so I no longer have to connect the cell via usb to charge or play on the radio! win! Question, I have been...

I have always kept a microfiber cloth and a terry cloth in my trucks, right now I have the terry cloth laid on the center arm rest to prevent the same thing as what the OP described. You never know when you will need either cloth. Pull up to F-Food window and it is raining, sitting at a light...

you have the ac set to max ac when it happened? It's common question. It is the ac pulling fresh air in instead of recirculating the same stale air. It is normal. I notice it on long drives it happens about every 25-30 min.

I haven't dug in far enough to know where all that is, but installing the kit for that upgrade was fun I am sure. Have fun be careful in Alfa obd world!

As Shives said it is unmarried. I have used mine to activate my trailer brake controller, change my (general) lights to LED, head light, fog light (oem led) tail light turn signal etc. and today I used it to turn on LED fog for a co worker jeep JL, and disable his automatic START/STOP. another...