Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I broke the female part of the temp sensor going into the air box. That is the part connected to the wiring harness. Is there a source for just the connector (the right part in the photo)? The dealer said they couldn't sell just that part, only the wiring harness. Thanks.
temp sensor connector
I broke the intake air sensor at the air box on my 2021 and got the expected P0113 code but I also got the Service Stop Start System symbol on my dash too. I'll know if they're related when I fix the sensor and will post back.
UPDATE: Fixed. Somehow BOTH wiring connectors to the taillight assemblies were disconnected. I don't know how this is possible since they have those annoying lock tabs that are difficult to release and I have never touched them before. My only thought is that they were not completely connected...
Thanks, you are correct. I didn't search NAPA since there isn't one locally. I wonder why it didn't come up in other searches since it seems to be a common part. Anyway, see my update.
UPDATE: I took everyone's advice and limited the driving and it's a good thing because I had to drive 60 miles to the nearest city with decent auto parts stores and the issue got much worse in that short drive. All internet searches only turned up the MOPAR part but the first store said they had...
Changed a flat tire today using the full sized spare. When I went to put the flat on the spare tire holder under the truck it turns out the hub hole is too small for the spare tire doohickey to fit thru. The bed was filled with stuff so I had to stick it behind the front seat. Just wanted to...
2021 4WD with 18k on the 3.6.
Last week I started the truck and the info screen on the dash went glitchy, flashing between screens and the UCONNECT screen would not turn on so no radio or cameras. Several warning lights lit up on the dash. Other than that everything else worked fine. Since the...
Yup, I just 3M taped them to a flat part of the chrome bumper on either side of the receiver hitch.You can't see them from eye level. Holding up solid so far.
I went a slightly different route with the wiring. The wires on the LUYED are tiny, maybe 22 gauge, much smaller than the wires in the 7 pin. I didn't want to try connecting them in such a limited space, especially with the incorrect size wire taps that came with the LUYEDs so I pigtailed wires...
My 2 cents from years of offroading: winches are way over rated. They look cool but they are rarely used and you're already aware of the weight issues and they often don't work when you need them. If you go the winch route do the portable setup. You said you're not going extreme rock crawling...
Got it , thanks! Much easier working on it from the back rather than under the truck. I kept trying to disconnect it by pushing the plastic pushtab and pulling it towards the front of the truck. Don't know why OP suggested that way. Now it doesn't even need to be disconnected. Just had to cut...
Any tips on getting the 7 pin connector out? I am pushing the pushtab at 2 oclock in and prying on the connector as hard as I feel comfortable with, it being plastic, but it doesn't seem to budge at all.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.