Search results

I just tackled it today. I ended up just using m8 nylocks with 5/16 washers all stainless. The nylocks did have more resistance than the serrated flange nuts but I went slower, used a little anti-seize and used a hand ratchet. I torqued to 16lbs as the directions I found said 14 +/- 2. No...

Thanks that is what I figured. Going to use nylock nuts with washers instead.

SO the dealer just called and stated the issue was caused by the 3rd brakelight/rear window leaking. The water fried the RF module behind the rear seat. Awesome! Window on back order of course!

2021 Ram 1500 14k miles. While in driveway if I shift from park to reverse or drive it goes back into park with the error message "Shifter Autocorrect Active". All doors are shut! I cannot drive vehicle. If I mess with e-brake on and off I can get it to drive a bit but will eventually shut off...

Great advice. Had no issues with the nuts going on smooth but dont thin my nut selection was great lol. Stainless a good choice? I used serrated flange nuts but used with washers which I guess is not best. I am going to replace with standard stainless lock nuts and 5/16 washers. I also did not...

Thanks for the responses. I used stainless serrated flange nuts with a lock washer and then a 5/16 washer. Not sure its the best because I have now read not to use a serrated flange nut with a washer. I am going to just replace with a standard stainless lock nut and 5/16 washer. This sound OK?

I just purchased OEM running boards on Marketplace but they did not come with nuts for install. I have a 2021 1500 crew cab Big Horn any idea what nuts I need? Do I need OEM or can I but from Lowes or Home Depot? Material matter (Stainless, Zinc)? Thank you!

Here's a few.

Yes 2" ready lift level kit with tubular uca's. I'll post pics ASAP. Thanks.

I got the 285/60/20's installed yesterday and they look great. No rugging at all on the stock wheels! The UPA's are very close to the tire sidewall but I can slip a finger between them so I think I will be fine! I really like the stock wheels and swapped to black lug nuts as well. If I have an...

So my truck says 36 for the stock tire so just run 36?

Just upgraded to Toyo At3 285/60's on the stock 20x9 wheel. Any idea what tire pressure I should be running? Says max 80psi and stock tires were 36 psi. Thanks

Thanks. Yes no off road group!

I have seen so much conflicting info it is driving me crazy! I have a 2021 Ram 1500 4x4 Night Edition and am looking to do my first upgrades ever lol. I am looking to do a 2" level in the front (spacers) and my 1st question is do I need to replace the control arms as well? Next hurdle is I want...