Search results

Does anyone have any recommendations for a scan tool that can clear codes behind the Security Gateway Module (SGW)? I've been looking at the Autel MaxiCOM MK808BT Pro. Their website states the following, however I'm trying to confirm if it can actual CLEAR codes behind the gateway or just...

I have the RBP Stealth Power running boards for my 19' RAM. I just snapped one of the brackets (for the second time). I don't know what the deal is. They have a weight rating near 300lbs and I weigh 192lbs. There's no way these things should be snapping. They took care of me the first...

My 19' RAM needs it's second exhaust manifold replacement due to warpage/ broken bolts. It was diagnosed in September (2024). It's now almost February and the dealer claims it's still on back order (passenger side). I'm normally a pretty patient person, but the tapping sounds upon startup...

My 5.7L Laramie has developed a whirring gear noise in the front drive training. I have tried the following: -changed both diff fluid -changed transfer case fluid -replaced rotors/pads - replaced front hub/bearing assy's It seems do def be coming from the font axle assembly somewhere. It's...

I'm at about 95,000 miles and it's time to replace the brakes on my 1500 Laramie. What is everyone using for replacement brakes? Stock? Aftermarket? I recently put PowerStop heavy duty slotted/drilled rotors and pads on my Grand Cherokee and they are crazy noisy. They click like crazy to...

Lately, I've developed a whiiring/whooshing sound audible between 20-60mph (Pretty sure it's still there above 60, however the wind noise drowns it out). At first I thought it was just tire noise, however I have fairly new KO2s and only seem to hear this sound from the right side (I can't...

I’d like to switch my lug nuts to gorilla nuts before the crappy 2 piece ones fail. Does anyone know the size/pitch? Gorillas website is horrible

So I’ve been watching the fuel economy gauge for a couple days and something seems “off”. It seems like the gauge is over estimating how much fuel is being used at idle. I first noticed when I spend a few days remote starting (and running for about 10 min). During those few days of doing...

I’ve read several member have had issues with loose sway bar links causing a rattle. I think I’ve developed this condition. Can someone tell me which end link bolts seems to be the culprit? (Top or bottom) I’ve check torque on the bottom ones and they are to spec....the top ones will require...

What are you all using for tire dressing. I’ve been a car nut my whole life but still have yet to find the perfect alternative. I typically use Meguires Foam, but I’m tired of it turning my tires brown when it wears off. I’ve also used longer lasting gel, but it’s messy to put on and a...

I’ve looked in every menu for my Uconnect 8.4N software version but cannot find it anywhere. Does anyone know where to find it? I’ve finally caved and scheduled an appt with the dealer to get it updated. I’ve got too many quirks that are driving me nuts. Then I recently received an update...

What’s the difference between the Vitesse Motorsports throttle control and the Pedal Commander. Why is the Pedal Commander more than $100 more expensive than the Vitesse? I’d love to hear from owners of the Vitesse (particularly if the install was as easy as the pedal commander)

Does anyone know if adaptive cruise functionality can be added to the DT RAM using AlphaOBD. If so what other parts would be required in addition to the steering wheel switch? Front camera?

I purchased the RC speedometer calibration tool to recalibrate my tire size. The instructions say to plug into laptop to configure to your vehicle. When I plug it into a laptop nothing happens and I just get a screen on the tool that says “ignition off? Y or N”? Any suggestions?

I’m liking the stance. Def not overkill. I drive a ton of miles, so I wanted to keep it modest.

Got the front done!!! Not an easy job, but I got it done in my driveway in about 5 hours. Would have been less, but on the first side I reassembesed the top strut mount incorrectly and had to compress the spring again and correct my error. Lesson learned. While it’s possible to do this...

Painted my blind spot sensors with a peelable wheel/body paint by Duplicolor. Their metallic gray is nearly a perfect match to the RAM Metallic gray body color.

I’m adding the Mopar 2” lift and would like to try it with the ORP springs. That said there are like 20 different springs on Mopar websites (each with a 3 letter reference). Does anyone know the 3- letter reference that points to the ORP springs ?

Was able to get my OPT7 installed with a few simple parts from the hardware store. Just be aware that you have to mount it as low as possible toward the bumper to prevent interference with the tailgate when it’s opened. Ignore the sloppy wiring, it was just temporary. I’m pretty happy with...

It appears that MOPAR discountinued the power running boards as an accessory. I guess that means those of us that didn’t opt for the option when building (or bought pre-owned like me) are out of luck (or have to go the aftermarket route). Does anyone know the reason they were discontinued?