Search results

I've bought magnets to install on the rear wall to hold the flap in place. Can someone give me a reference to determine how high the magnets should be mounted? There are no holes in the sheet metal, and no indentations on the rear wall. Thanks, Brent

The noise from the rear vents seems to be louder than I have had on other vehicles. Really quiets when I turn on recirc, so the flaps are closing. I'm wondering about applying foil/foam insulation to the back of the rear liner, the Panel Inner Silencer. I realize I will need to keep a path...

I have a 2022 BH with Level 1 EQ. Last year, I swapped in Heat/Vent Front Seats and Heated Steering Wheel. They didn't require programming to get the hard buttons to work. I have now programmed them with Alfa and the soft buttons now appear on the display. I just swapped in Heat/Vent Rear...

Just drove 8 hours in my 22 BH and noticed that I was constantly correcting the steering. Remined me of old cars that had a worn out steering box and you had to constantly turn the wheel left and right to take up the play. Not that bad, but definitely noticible. I have not noticed this before...

I just added the USB/`12V panel to the rear of the console in my 2022 BH with Level 1 Equipment Group. 1. Although the OR/GY-PANEL LAMPS DRIVER and YE/BU-READING LAMPS DRIVER wires were both present in Pins 6 and 7 of XY360A the USB panel does not light up. What am I missing? Is a USB cable...

I'm in the (hopefully) last stages of wiring my 2022 BH for swapping in heated/vented seats and heated steering wheel. I still need to pin wires into XY310A and XY331A. The wires have to be added to the "stationary" side of the connectors. These two, and a 3rd connector are...

I need help finding the locations of these 2 connectors in my truck. I stole wires from the donor harness and need to find these connectors in the IP of my 2022 BH. One connector is a black, 12 pin female. The wire I need to pin into this connector is OR/DB; LIN BUS CBC 3. The other one...

I understand I need a "bypass" OBD port in order to use Allfa. I have a donor harness. Can I take the OBD port from that harness and install in my truck? What, actually do I need to bypass? Anyone have a wiring diagram to connect the extra "bypassed" port to my truck? Thanks, Brent

Where can I find wiring diagrams and connector information? Like I used to find at DodgeBodyBuilder?