Search results

Those cameras are digital, and specifically only work with the trailer surround camera processor. The camera pins on the 12 pin are analog.

Pins 2 and 3 are CAN BH for the surround view camera processor. This pinout is the same on the 2025’s.

Sales code is the unique 3 letter code for each item/feature on the truck. They are shown in the order guides. You can request the build sheet for your VIN that shows all the features and sales codes your truck is built with from Ram or a dealership. You can find TSB’s on the NHTSA website...

Yes, that’s exactly the main purpose of alfaobd

First mistake- asking a stellantis employee about a feature. That’s the way it is anyway. Sales codes are generally not available to add after the fact, unless it’s a Mopar accessory kit that is offered, such as the trailer brake controller or power side steps. I recently talked to him. He has...

Based on their cycle, they are just about due to release the next update:

Digital rear view mirror

Based on the behavior I see of the surround view kit on yours and @Laramieblue truck, and that same behavior on previous model year trucks, I know for a fact that it will work provided trailer surround view is in the bcm configuration on these 2025’s (and I’m sure it is). Once we figure out how...

You’re confusing/mixing terms when you say aux 1, 12 pin, and aux 2 port. Aux 1 and aux 2 are both run through the 12 pin. The top port is simply the “tow mode camera port” for the DRVM. The resolution that you see won’t get any better once configured correctly, because even though the...

Yep. Like I said before, these 2025’s aren’t programmed for trailer surround view camera system. It’s programmed for the 82216068AB auxiliary trailer cameras. This behavior of the trailer surround view camera system on any truck programmed for auxiliary trailer cameras is well documented since...

This is incorrect. 68527599AA plugs into the coax port on the bumper not the 12 pin, and displays in the digital rear view mirror, not on aux 1. 68527709AD is the trailer surround view camera kit.

Did you swap in memory capable mirrors?

Manual updates only. I believe they stopped trying OTA map updates because they are too big to send over cellular, and were causing impartial install issues. https://stellantis.navshop.com/#/downloads

It’s a little goofy how they have that set up to work. Try switching over to headlights on, then verify that all lights are on, then move it back over to auto and re-check the lights (provided it’s dark enough for the lights to kick on).

Map updates are always free for Uconnect 5, and new updates are available every quarter.

Is this a Canadian truck with no off “O” position on the headlight switch?

Ok, those two sizes on yours are identical to a regular fakra male connector. It’s almost as if your port is designed to accept a plug that keys in and seals around the whole diameter of the port.

Short cats assembly part number is for 2019-early 2020 builds. Long cats assembly part number is for late 2020-2024 builds.

I mean, the surround view camera system (68527709AD) will work if we find out if their is a way to configure for it on our own with alfaobd, just like we do when adding trailer surround view camera system to a pre-2025 that wasn’t factored configured for it. It’s just that Ram won’t reconfigure...

No known mechanical issues on the hurricane yet in its fourth model year in production vehicles. I was referring to the hemi, which was still trying to “work out the kinks” at the time it was yanked from the Rams.