Search results

I'd recommend a minimum of 12' ceiling for a lift if you want to work comfortably under the vehicle. You can find all sorts of different lifts depending on what you want from them. A 2-post lift is most popular for general automotive maintenance, because it leaves the center of vehicle...

I thought the 33 gallon tank was standard now

More body panel screws, not bolts.

Mid terrains work good in deep snow but not that great on hard packed snow or ice. Some are able to be studded though which would help

Based on OPs own comments he understood there was a risk. There does not need to be a written waiver of liability.

Completely different circumstances.

I would never expect, or even ask for a shop to replace a part I knew could get damaged when doing something I asked them to do. Morals count.

It's not their "mistake". He said the shop used soak ropes and towels, so they took measures to minimize the risk, but there is always a risk that the OP understood could happen. Just like when getting chips in windshield repaired. Shops will tell you there is a chance the chip could spread...

Good to know. I thought I had seen others post that they were just caps.

Not even close to the same comparison. Wpoing up paint off your floor is not even close to expecting a shop to replace an expensive module that has to be reprogrammed by the dealer. and based on his post, he knew the risk.

Pretty sure the front is just snapped in "caps". You could also install utility tie down rails on the inside of the bed for tie down points. Unless there is a reason you need them to be on the bed rails.

The shop does not have to buy him anything. He understood the risk involved with getting windshield tinted. It's his responsibility to replace if it is bad.

I never have to wait for Santa to buy parts for the truck, or really anything for that matter. Nothing planned yet. Will see what the wife wants to do. This may be our first vacation without any kids, so might try something a little more fun. Twin turbo kit Eh, it is what it is. Kids are...

TazerDT and Pulsar XT can both completely disable traction control.

That elm327 will work fine to read codes.

For adapter. the VGate Vlinker MC+. You will also need to install a scanner app on your phone. There are many free ones available that will read codes, but most of the free ones won't clear codes. If you are a data guy and want to see different readings from sensors, and not just the codes...

Yes, when replacing suspension parts, I prefer items with grease zerts.

How do you like the grease gun? Been considering picking one up .

There are 1000whp stock internal Hurricane HOs

No, not quick disconnect