Search results

I have seen this before and its when can bus is shorted with other wires. It can either be in harness because the pins are way too close and have tight tolerances in connectors or the cvpm might have internal issues. To start unplug the harness from everywhere and do a continuity test using...

Either the fuse tap isn’t pushed in all the way or Can bus is shorting out make sure none of the wires are bridged at connectors. Also make sure pins are in right positions in connectors.

I have detailed posts on it. Check my profile

It doesn’t have it. Mine is a 19 too but i have a 23 bcm which is the only way i was able to get all new features.

Idk about windows version but in android there is a search bar. Search for the word camera or activation. Or you can search in forum and see what its exact name is. I assume windows version has search too. Also its a newer year truck bcm thing too idk what year your truck is.

Thats another bcm setting you need to make. Its parksense camera activation or something like that. From the image it looks like its already calibrated and good to go.

Lol. If you have no image in 360 view with black surroundings around truck you need calibration. I know the tow mirrors get lines all around truck and regular mirrors get lines in front and back only

Can bus lines are usually 2-3.5v so thats not the issue. Check your power and ground wires and make sure you have 12v there Also i see you only have one fuse in fuse tap? You need to have 2. The outer one is what powers the cvpm. Pin 4 and pin 12 is what you need multimeter on and measure for 12v

Correct the fuse you remove goes into the tap. If you are unable to connect to cvpm with alfa and already probed the connector pins at cvpm with multimeter and have power then its either a bad can bus connection or faulty cvpm. Make sure to check all the pins and connections first. You...

I use multimeter and pieces of wire to stick into terminals at connector to see if there is 12v and ground.

Its either a power issue or cvpm is not connected to uconnect 5 properly. Thats the only time i have seen blue screen recheck all the connections and make sure the fakra connections didn’t get mixed up. I don’t have front camera softkey as well. It seems like most people don’t. It is however...

How were you able to add the sales code on 26 BCM? Did dealer do it? Also the 25+ might be using the newer mirror and the module its complaining about could be the mirror processor. Basically that is like a hub that sits in between mirror and camera and lets you plug in multiple mirrors from...

UPDATE: I went to the dealer and they actually broke the DASM lol. After i left the dealer and was going home all the ACC FCW LKA AHB warnings came on. When i went back to them they made me wait another hour only to come back and tell they couldn’t work on it. I spoke to the tech and they used a...

Finally got my windshield replacement done last week but ran into issues with uconnect top buttons. So basically i bought a used DASM and installed it after getting the windshield done but my uconnect top button for lanesense wouldn’t do anything at all. IMPORTANT: I used cda6 and turns out...

Yeah if the cvpm has power and connected to radio you should see something on screen. Try “ecu reset” on radio in alpha 2-3 times. If still nothing then probably something isn’t connected right or faulty

Check power and ground at cvpm connector and make sure you have right pn# for camera and cvpm. Also check radio, camera and cvpm connections aren’t mixed up.

UPDATE: After getting a new camera module with same part number i finally have the system working. Thanks to Cesar592 for selling me his used camera module.

Do read system status and make sure both the ESC and EPB plant mode disabled procedure is run before doing it. Restart alfa app. Make sure parking brake is off by toggling the switch. Keep ignition on and then keep foot off brake. Make sure the parking brake doesn’t auto engage. Once you are...

Idk if abs/hcu from different vehicles will work. I have read through entire forum from beginning and didn’t hear much success from that. I did take apart my unit and i saw the abs ecu has 3 pin connector that goes into hcu so it might be software related over LIN bus. I even spoke to someone...

What error codes do you have? Does the system id read your actual vin?