Search results

The base 6 w/anc has the same rear door speakers as the alpine 9... but always double check your install. I am approx two months into this mod and I am enjoying this upgrade, even without the rear 3.5 roof speakers-yet to install... All is working as intended, ANC, Sub, center and surround ---...

KK... if you're starting with nothing... you'll need the new switch, all the led's, custom wiring harnesses, factory harnesses, wiring connectors and pins... It sounds worst than it is but this mod is more time consuming than anything, I am on duty today and when I get home in the a.m. I'll...

@vincentw56 -- what lights are you missing, dash, seats, doors?? -=FM45=-

I believe this is the only setting needed to make with Alfa-- CBC Config I/O-Ambient Light Dimmer Wheel Input Present -- change to 'Yes' ** sim -- Alfa is Windows or Android based... another company makes a Apple compatible software-- Mine came with the updated switch but I did add all...

All the wiring should be there... Pull your head light switch and compare with the one posted... -=FM45=-

The new dimmer and a change to the BCM with alfa or sim... -=FM45=-

... OR center console -=FM45=-

Some members have asked if this mod was even remotely possible, the answer is 'YES' .... dooable and DONE (mostly)... Other than mounting the 3.5's in the rear headliner, my Bighorn is 95% complete. Many members have ditched their Alpine 9 and since upgraded to bigger and better -- well this...

Just the shields over the riser.. sorry for the confusion... mounting holes/ pre threaded already present.. -=FM45=-

Just some added info when you dive into installing the under seat storage... you must remove the rear seats, remove old risers, install under seat storage, install new risers and reinstall seats... Installed a handful for customers and there is no easier way... -=FM45=-

@Atrophaeus .... I'm in MASS... but willing to help in any way.... this mod is actually very doable for any skill level... -=FM45=-

Per your illustration ... A = pos 1-2-5-6 1-6 plug - OUT towards wheel well 2-5 plug - IN towards center of truck B = pos 3-4 plug - UP Have no info on any 'Force' calibration.. -=FM45=-

Sorry I should have mentioned... I have the 8.4 non nav but this mod should work on any 8.4 or 12.1 ... 3 changes with Alfa is all that it takes to go from base6 to alpine9 once the hardware is in place... -=FM45=-

Until I get the how-to together... anyone who is interested in this mod, you can get a jump start by collecting the needed hardware... These can be ordered new or they can be sourced thru eBay, CL, this FORUM, take outs from local radio shops, and etc. Parts needed to mod the 5.7 Base 6 w/ANC...

If you use the windows version it will show the change(s) you made at the end of your config file upon exiting the software... well at least mine does.. :) -=FM45=-

Use this and you'll be good... Lower grille trim -open grid style- 68334531AD -=FM45=-

My Bighorn 'did' come with the base 6 spkr w/anc non Nav... the sound is Ok for what it is.... But at present I am modding my system to the Factory Alpine 9... I have it half complete and it doesn't sound too bad... I wanted to keep it simple and clean... don't need my ears to bleed---been there...

@ sport--- If you're referring to my write-up... follow my how-to but just substitute/add-on the parts required for the semi-auto... it's just a couple of extra parts and steps.. If you need more just pm me... -=FM45=-

here-- https://www.mycartrim.com/years/2019/ram/1500-(crew-cab)/venom-s-body-side-moldings-2019-ram-1500-crew-cab perfect fit and color match ... -=FM45=-

This is the part number for connector-- 68316041AA -=FM45=-