Search results

Just so you know, the issue is with your dealer, not the manufacturer. The F150 that I lemon lawed was required to go through arbitration because Ford refused to acknowledge there was a problem. My dealership salesman acknowledged it and then the service manager acknowledged it, but Ford would...

Facebook Marketplace or eBay

The '21 didn't the leaks from the 3rd brake light if I recall correctly. The rear window is a different story though. Get some Permatex flowable caulk from the parts store and slowly run it along the upper rear window channel. Be sure to add extra in the corners so it will flow down the...

I'm at 36k miles on my '21. I've had a few issues also, but in today's world, I think you'll find all manufacturers are the same. I have a '22 Audi S4 that's in the shop right now. I have nothing but electrical gremlins on that car. If they removed all the electronic nanny features, the...

Why do people put the $ sign after the amount and the percentage symbol before the number in so many posts? The $ goes before the number and the % goes after the number. I've been thinking of getting the cargomaxx springs. Glad you reported on them working well as I might have to get them.

I had to replace my low note horn last year as it just stopped working.

The frame is the same isn't it. The pic you posted shows the exact frame bolts and slot as my 5.7. What's different in the mounting?

Here's one that most never mention. DO NOT USE LOANER SPRING COMPRESSORS. The loaner spring compressors are weak and don't work well with heavy duty springs. I bought some heavy duty spring compressors from Amazon and they worked great. The loaner sets start bending under the extreme...

Fix the window yourself with Permatex flowable caulk. The mold in the back is something that the dealer SHOULD address, but not sure that they will. Good luck.

Actually, most lemon laws MAY require multiple attempts to fix an issue, OR the amount of time out of service. It's not both. The dealership will offer the trade in as a 1st step. Ignore that. The next step is to verify your state's lemon law guidelines and mention to the service manager...

1/4" spanning the distance of 12' is not noticeable to 95% of the people. If it was so noticeable, the factory wouldn't have done it themselves.

You won't notice the difference. I have 1.5" all the way around and the fitment appears perfect.

In the Uconnect settings.

I think many are experiencing different clunks. So, I would suggest checking the sway bar endlink bushings, UCA torque specs, brake caliper bolts and hood bump stops. If you want to replace the sway bar body bushings, do it, as many have shown there's to be quite worn with low miles. But, if...

Your opinion

If you don't protect the decals, they will crack, fade, and start to lift at the edges. There are protectants that offer a lubrication to keep them from getting brittle. The sun and UV rays will cause them to deteriorate without some protection.

I forgot to mention that my alignment was done by the dealer!!!

I have waxed over my decals for many years. I had a 2003 Monte Carlo SS Brickyard 400 edition that had decals all over the car and on the hood. The decals looked great after 12 years, except the aftermarket hood decal that was put on after a slight accident. That one started to discolor and...

My truck needed to be aligned 8x after I did the level. The problem I have is that the truck was fine after the level until I went for an alignment. After the alignment, my wheel was at about 11:30. I straightened the wheel myself two weeks ago. Someone posted instructions on how ro adjust...

You're being ripped off. My dealer mentioned a $300 cost for front and rear diff fluid. My dealer also charges $39.95 for my truck's oil changes. They have a $200/hr labor rate, so the plugs should be a 1 hour max effort. I would think everything you're getting done, by a non dealer service...