Search results

He’s got a full digital cluster. The menu for trailer light check doesn’t show up in the full digital cluster. The only way to access it is through the trailer app in the radio.

That manufacture date has nothing to do with when the truck was actually built. That’s about the time the truck is released for shipping, which could vary wildly from the date it was built.

The build date is the “MDH” number on the door jamb sticker. That’s the month, day, and hour your truck rolled off the assembly line.

You don’t need to use the autoauth subscription for unlocking the gateway to do bidirectional (clear codes, etc). You can use a bypass cable, like the one linked below, to bypass the gateway all together. https://a.co/d/iwvsEqF

I’m thinking that SPAAK requires the digital NFC cards, and the digital NFC cards require the dual wireless charger (to place the card in to start the truck). I don’t think you can get the dual wireless charger without the full center console (5 passenger seating). But, on the Laramie, the dual...

No. Check post #2 to pick out the correct CHMSL for your truck.

The camera in that brake light part number is incompatible with that digital rear view mirror. That brake light can only be used with the 2023+ digital rear view mirror 3.0.

That CVPM is for the trailer surround view camera system, not for the truck surround view.

Disconnecting the battery doesn’t do anything. Your shift points are off because the tires are bigger than what the bcm thinks they are, so the size needs to be corrected, which in turn will correct the speedometer and shift points.

There is no transmission shift point adjustment. It is done by correcting the speedometer for the bigger tires by adjusting for the taller tires. Make sure that if you’re using a gps app on your phone to check speed, the phone can’t be connected to the truck in any way (otherwise it’s using the...

I’ll pm you a mini writeup for the HD guys that you can paste into the 1st post. It’s really the same install/bcm requirements as the 1500’s, just a few different CHMSL part numbers.

Your CHMSL with camera will be 68465996AA. Follow the first post for your mirror part number.

Surround view cameras, or not? If not, do you have a cargo camera, or no?

You can do that. You’ll get a message in the cluster on each startup that says rear view mirror unavailable, but it goes away after a few seconds, and everything works as it should.

That’s just so the bcm knows to use the fog lamp switch input on the headlamp switch. This setting has to be set to yes when equipped with fog lamps, otherwise, pressing the fog lamp button won’t turn them on.

In settings, trace and restore.

Yes, I suspect they performed the restore vehicle configuration, and reverted all your alfaobd changes. The alignment completed and passed, so that’s all good and won’t need to be done again. I’d say just grab the truck back and check all the settings with alfaobd.

Nothing you can do right now. Once alfaobd is able to configure for 2025’s, it’ll basically be the same install procedure as the previous rams.

The “program tire size” section is a shortcut to “VehConfig 4: Dynamic Tire Circumference”. When you make a size change in program tire size, that VehConfig 4 value is what is being changed in the BCM. All of those tires in the list are just shortcut values that the developer converted on his...

In the cameras section in your radio, do you have the AUX 1 and AUX 2 camera soft keys?