Search results

Just get a splitter with teal ends as they are neutral keyed fakras. Mean they will plug into any other color. Also larger fakras can be swapped by removing the locking tab and pulling the fakra off. Then a new different color fakra can be installed. Another alternative is to get simple 2"...

When the last two letters change in a part number that just means its a later version of the same kit. First was 82216421AA then 82216421AB then 82216421AC then 82216421AD and so on. If you are looking to get the latest kit then find the latest part number which in your example would be 82216421AE.

Yes, just like @SitKneelBend said you need to make sure you match the features of your truck to the 12" screen you get. Example is traction control button above the 12" screen. These buttons can't be swapped from screen to screen so make sure to get the correct one for your application.

That's XY430A. Yes it is for rear heated seats but you are missing the remainder of the factory harness that goes to the seats. Wiring layout for rear heated seats saved to PDF for you. Is this where the connector is located?

Come check out our options for OEM radio upgrade. Our units integrate better than aftermarket units as they are OEM that came from higher trim trucks. WE have plug and play kits for 8" or 12" radio upgrades. Either Uconnect 4 or Uconnect 5 upgrade. Feel free to reach out to our Advisor team to...

Are you referring to the charging USB in the top center console? Picture for clarification. There is no direct fuse for just a single USB hub. If it has died, try cleaning it out with 90% isopropyl alcohol.

This would require a bezel upgrade and some programming changes, adding cabin sensor, and you should be good to go.

I don't know what radio you have as I can't see part number but the Uconnect 4 and 5s both came with maroon and red fakras. I am correct in the color of what they are intended for but it depends on the radio and year it was made to know what your unit has. 5th gens do come with digital backup...

That is a maroon fakra, typically for wifi/phone/3G. Red fakras on older units was not used for diagnostic port. Later Red fakra became digital backup camera.

You can't update you unit to Poland maps on your own. You have two options. One replace the radio with an UGX which is the radio that would already have the correct firmware and maps you are looking for as its made for your location. Option two is go to Carperformance.se They have this wonderful...

90% isopropyl alcohol is safe for electronics as well as BW-100 is also safe as it evaporates quickly. You shouldn't need to remove the USB to clean it unless it is very badly packed with dirt some how. Give the USB hub a spray then plug in a connector over and over again. This will help clean...

T27.46 is the latest firmware for the Uconnect 8.5" and 12" systems.

If the radio is delaminating then you have a good change at making them replace it after warranty if you raise hell. I've seen it work more than a few times as they know their units have screen issues. If that fails we can fix what ever is wrong with the unit, it just takes sending us the unit...

Yes, we need the part number of the Uconnect module you are using. If you have the VIN of the donor vehicle that is helpful but not needed in most cases with the part number of the module. Its on the sticker of the module. Also go into settings and get the current build number.

It's a bug in their software. Hopefully Uconnect releases an update that corrects this issue.

Just get the same part number of your dead UAX module.

Did the vehicle have its radio upgraded? If that happened you would not get Uconnect services like SiriusXM Guardian but the built in navigation should work. If not maybe there is no GPS antenna, bad GPS antenna, or something wrong with the radio module.

Give the vehicle a few sleep cycles. When installing a Uconnect radio upgrade, sometimes audio doesn't work right off the bat. Now if this is your stock system and randomly you have no sound then there is an issue with that unit I'd image. Try doing an canbus reset and let us know the results.

Also sounds like a defective screen. What radio system did you have from factory? DM me your VIN so I can take a look at your factory build. You should have had navigation if you had an UBL. Uconnect 5 UBL module should allow a Uconnect 5 12" screen to work.

If not a screen protector then your screen is delaminating. This is where the digitizer is being released by the liquid crystal under the digitizer from the LCD. You can replace yourself if you have the skills just make sure to use a screen that won't delaminate again. LG made these screens and...