Search results

I am missing somehow the part number for the bracket that hold in the camera in the mirror? For some reason I do not see that mentioned anywhere… planning on drilling out my existing mirrors. Pete

I was wondering if someone can post a “backing up” picture of an 8.4 non nav with the 360 surround? I am thinking of adding 360 surround to my truck.. Currently when backing up the “reverse “picture takes up the whole screen, and makes it quite easy to see as well as hooking up a trailer… I am...

Or, by the sounds of it, you can take apart your current mirrors, drill the hole in your existing mirror, (markings /brackets on the inside), install the camera, and put it all back together…..

I just put Rebel 18 inchers on a 21 Laramie, replaced stock 20 inch stock rims… cladded them in 265/70/18 Michelins… Ride quality improved noticeable, maybe a little more “ soft” but I don’t autocross this truck, it is a highway cruiser…., no rubbing or any fitment issues… speedometer is within...

I was thinking of something like this… however part number is no good… but I think it would be a cool mod..

Has anyone ever figured out to see if there is a way to get cup holder lights in our trucks? I know we have the overhead projection light that shines down and illuminates the center console, but I find that light distracting.. got it taped over….would love to find a way to get some light in the...

quick question on this subject: it does appear that you can install the camera’s in your existing mirrors, is there anything special required for this? Obvious where to drill the holes? anything special to attach the camera to the mirror?.. not having to buy mirrors will make this project make...

Thanks for the info guys… Soon as I pull the passengers rear seat , I will look to see if there is a plug back there… I did pull the aft cup holders in the center console to see what it is going to take to install the switches…. No extra pigtails there…. In the end , it might be easiest and...

Interesting… found the fuse points for the L&R rear seat heaters, looks to be F20 and F29, what , surprisingly , have fuses in them… Does anyone have access to a wireing diagram? Would love to see where the wires from that fuseblock end up going? I have a sneaking suspicion that most of the...

i just did some looking on a diagram that I have, there are indeed some spots for fuses for the rear seat heaters.in the foot well fuse box….., I presume the wireing is in place, at least upto that point…. Now the next question will be, do you need to “add that option ” with AlphaOBD in order...

Yeah, not a bad thought, Laramie with most options, but it’s a ‘21, so I got shorted out of the heated rear seats, and some of the ambient lighting..Covid shortages….. most strange thing is also no Uconnect (telematics), no SOS button etc….. not necessarily a bad thing on that one, just never...

Have an Electrical question: Is there an unused spot in the under dash/drivers footwell fuse box for a switched 15AMP circuit?.. back story, installing aftermarket Rosta seat heaters for the rear, going well, but need a 15AMP switch power supply.. I can pull off the battery and use a relay with...

Page 44 -45 has some good info with pictures…. The harness from Jimmy is labeled with what wires to tap into by the front seats… make sure you look at the pictures on that page on WHERE those wires sit..

Just wanted to chime in, just did the rear doors, got the wires from Jimmy, the part numbers from page 1, all pretty straight forward and exactly per the instructions in this thread, about 3 hours for the drivers side, 2.5 for the pax side…and I was not working very fast or hard….. no real...

I thought I read that as well somewhere, but could not find it again, so was not sure… anyway, placed an order again, see what shows up… if nothing else, caps were cheap.. Pete

To add to my own post, looks like the problem might be the Olive Green caps, Mopars official site shows the handles in stock… does anyone know if the little magnets, in the caps that make the whole thing work, are swappable ?… IE, if I would order whatever color cap is available, can I take the...

So Moparpartsgiant cancelled my order for 6cv361fpad and 6cv52kfpab door handles and caps due to “ parts NLA or not in stock with no ETA” I will swing by the dealer tomorrow and see what they say… anybody have any thoughts on my options? Think this is a strike/no one working in the warehouse...

Yep, saw that earlier in the tread… exactly what needs to be done….gonne see if Jim has a couple of harnasses for me… thanks Pete

I seem to have read a couple of post that went into where/what color on the wiring … thanks for responding…. I thought, that if you already had PE from the factory , it was indeed pretty simple to add just the rear doors….Front doors/tailgate PE work as expected from from the factory.. Pete

I seem to think that the rear antenna was only needed if you did NOT have PE… ?I already have PE on the front doors /tailgate from the factory… I can open the tail gate with the key in my pocket without having to unlock anything, so I presume I have the rear antenna..I just want to add it to the...