Search results

My neighbors 19 Ram with 50k on the dial started acting all funky like this, would not start, would start, needed a jump in the morning etc. took it to oreilys and it passed a battery draw test. I told him that was ******** and it needed a battery. He was skeptical but the next morning it...

Put rebel style flares on mine. Trimmed out with 1/16” rubber gasket

Also got this info from a car alarm installer. Have not tested it but here is what he told me. Starter wire. Lt blue/tan. Bcm above drivers kick. Black 24 pin plug. Pin 19. pparently opening this wire will disable the starter.

Was any more information discovered? Were you successfully able to add the kill switch?

Im about to add this kill switch to mine. Did you ever determine if this method works if the vehicle is remote started?

Yes.. i dont see any possible way to keep the active air dam with a front skid plate. Its a big bar/motor/mounts/linkage/fairing setup. Mine took a mpg or two hit at 70 removing it, but the factory bumper is tin foil..

Thanks! I contacted the westin customer service and they informed me you can buy just the housing/bracket kit. It is part number 58-991PK for the square opening kit. Post up a pic of yours! :)

Pics

Here is a better view of the westin skid plate, and the gap id like to fill in.

Ive got the westin promod bumper installed on mine and there is an optional skidplate that I did too. Its a nice bolt on setup. The only slight issue is the back bolts to the old active valence mounts, not the crossmember, leaving a few inches of gap there. Going to fabricate a filler plate. As...

Is there a way to manually update the software with a usb card?

Looks like the trailer brake connector

So I did an oil change today and its much easier to get to the filter with the westin bumper. Before the new bumper I needed to use ramps to get enough clearance to get under there. Now I can do the change no ramps! So a small hidden benefit of the bumper upgrade.

What kind of gas are you guys running, and what was the tank level? These things can happen with low octane crappy / dirty gas. Put some good gas in (89 or above) some seafoam, and floor it a few times on entrance ramps to blow it out. Also resetting the ecm on occasion is good too, clears...

Got the new fogs lined up nice. Really like these rigid fogs.

Got the housings and rigids installed today. Also picked up a set of harbor freight cubes to fill in the other openings. I ended up wiring the rigids directly to the oem fog circuit and it seems to work just fine. No flicker, no weird errors in the truck. I had oem led fogs so i figured the...

I got the westin mounting kit, its bad ***. I opted to get some DOT led fogs to get a legal road use amber pattern down.

Does interrupting the red wire at the ignition connector also disable the cloned fob attacks? I mean will the fob still unlock and/or remote start the truck? Or is this just a basic starter kill at the button? Useful information here, thanks for posting.

This is with no take-apart of the truck.

I ran. 16gauge marine 2 conductor thru the firewall today. Path using a fiberglass stick that I sharpened. Took 3 tries. Got thru on the 3rd time in the oem grommet. Silicone lube helps. Posted to show the angle. Penetration of the firewall should be parallel to the ground/frame.