Search results

Double check your re-pin and make sure the pins are seated all the way. This should not interfere with any of your issues.

Went for a test this morning. Thea gauges show up in UC5 and the digital cluster, went on an embankment but they don't show any signs of working. They all show "0", if you drive over 25/mph they will show "--"

You have to upgrade to the 23 BCM. Also, you need the 23 UC5 Radio module, it has a special ethernet port for the digital cluster to display the map in the cluster. I bought a new BCM and had the dealer install it and restore the configuration to original, ($150). After that, I went home and...

Ya, that is the downfall of the cluster. It can only display the OEM navigation map. They don't show traffic at all. Limitation bt TOM-TOM.

No harm done by doing so. Just change it back when you have to go to the dealer. ;)

I use the one Infotainment send me with the programmer for the digital cluster. I bought the upgrade kit from them.

I needed to bypass mine for the maps to show in the digital cluster.

No Tazer, but I have the SGW bypassed.

I have also a 2019 with UC5 update. This is what my performance pages show.

Sure you can, have a read here. Any map, full screen. https://5thgenrams.com/community/threads/carlinkit-ai-box-for-full-screen-aa.59738/

Don't sweat it. All kind of weird bullsh.... happens when you replace the battery on those trucks. Sometimes it takes a view hours to overnight for everything to work again. Just let it sit and wait.

I bought these. They have white and amber, can be used as turn signals or always on, just hook them up to ground and ignition power...

Here is one, now install it.

Yes, make them after installation.

Yes, alfaOBD can do it. Two AlfaOBD settings to change: VehConfig 8: Overhead Console Type- Premium Lin & Misc: Overhead Module Present- Yes

Can't just swap it in. You need a conversion harness, @Jimmy07 can provide it, also, need to program BCM to premium console.

If you don't change the to bigger brake pads, you gain nothing in stopping power. You can put 18" rotors on, same stopping power.

All in the first post.

Try to unplug the 2 connectors on the control module itself. It is under the driver kick panel. Worked for me one time I had this problem.