Search results

I have the factory spray-in and to avoid dents and dings from dropping anything I purchased a Black Armor bed mat. The mat is 1/2" thick, recycled rubber and precision cut to the truck and also weighs about 90lbs so you don't have to worry about it blowing out.

Also, just to poke the bear. The amount you are off is always a percentage not a fixed number. The amount you are off will be different at higher speeds versus lower speeds.

Not really, there is a hole on either side of the bed directly in front of the bed tiedowns, the drain tubes should go there.

If it is just double sided tape, you could go to a local detailing shop and have it removed and then buffed out. That's what I did when I had my truck debadged, didn't want to scratch or mess up the paint.

My 2022 Bighorn Night Edition doesn't have any trim pieces down the sides, must be a Limited thing only.

True, you got me there. 😁

I use the 5.7 non eTorque, doesn't have that silly start/stop thingy. LOL

Thank you, I plan on installing and running wires this weekend if Hampton Roads weather permits. LOL

I'm adding LED lights to my Bighorn, I have the add a circuit/fuse tap for the power figured out, but where did you end putting the ground wire. I am not very proficient when it comes to wiring so any help would be appreciated.

I know it's been a while since you did this, but do you remember the part# for the fuse tap and did you run both wires from the lights into it and if not where did you hook the black wire to. I assume black is ground? The reason I'm asking all this is because the light wiring seems to be 20 or...

I'm considering upgrading to 295/65/20 from 275/55/20 on my 2022 Bighorn. Is anybody running this setup and if so, how much lift was needed and what offset are you using with aftermarket wheels?

I like the blue ram lettering on the radiator fairing, which blue did you go with?

I would think there would be seeing how it was an option from the factory. I ordered my 2022 Bighorn with the anti-spin differential and 3.92 gears

where did you get the flag overlay for the grill?

My 22 Bighorn has it as well

That's the great thing about our world and society, everyone has their own taste and opinions. This is what I like and I am OK with everyone's opinion. As most of you have said, it's not something you would do and that's alright. I just wanted to share pictures of a modification that I chose to...

I live in Virginia Beach VA. Snow is a once every 5 or 6 year event for us.

Yes. personal preference

So I finally got everything I needed for my front license plate relocation. I used a clamp on bracket for a Ford Raptor from iJDMTOY, got it on Amazonia for $40, clamps right over the factory tow hook. I ending up need a spacer to keep it from closing in on itself when tightening it down, got...

I had the Ram lettering and Bighorn badge removed to clean the look up a little. Looks so much better. I just wish the tailgate Ram logo wasn't recessed and held on by clips.