Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
If you get your ECM unlocked I suggest going through HP Tuners. HP Tuners will just unlock it. Diablo unlocks it then re-locks(so to speak) it so only they can tune it. Or so I've read.
IMHO the best is the Mopar ram air CAI. But it's stupid expensive. :( The Vararam would be a close second. But I don't like how they handled the breather. It should be part of the intake not just have a little filter slapped on it.
Many tuners desensatize the knock sensors(only thing I can think of that would be called "noisy sensors"). Which isn't really a good idea, mine were desensatized for a while then after more research I put them back to stock. Turning off torque management improves performance no doubt, but it's...
It won't build up on the intake valves of the HEMI like a GDI engine will. But a catch can is still a good thing as long as you maintain it. I put a new intake manifold on my Corvette C6 (port injected LS2) and the old intake was full of crap from the PCV system. Yes you could see it was...
Yeah that's typical. All the oil has drained down into the pan. You will get a bit of noise till the oil pump gets oil up into everything. Especially on cold days when the oil is thick as hell. This is where synthetic oil really shines. It gets up there and lubes much faster when cold...
If everthing is the same except length then go for it. I used to do that with some Motorcycles I used to have. Found a cross reference for a longer car filter that was compatible.
0w20 is fine. But I personally would save that for cold weather and run 5w20 in warmer. Generally you want the narrowest weight range of oil for the conditions encountered. The reason, the greater the range say 0 weight to 30 weight requires more complex molecules that wind and unwind...
True Hemi tick is from the roller on the lifter locking up. You don't get the "tick" until it's ground the cam down to where the sides of the lifter and hitting the cam lobe. By then you're F*&^%. This is different then just plain old noisy lifters. Which Hemi's seem to be known for.
Long tube headers often move the stock O2 sensor location farther away downstream. IDK about Mopar but many ECM's don't like that one bit.
My suggestion would be to stick with shorty headers if you don't want to open that can of worms.
Disclaimer: Below is based on experience with a GM vehicle...
I tuned my 07 Vette myself. On a mostly stock engine the only thing a tune will really do it lower the stock commanded AFR at wide open throttle. It's overly rich for safety. They may also bump timing up but that requires higher...
Any drone while at highway speeds? I haven't done a cat back on my Ram yet. But when I was looking for an exhaust for my Vette a few years ago I went with Corsa Sports because they were known for not having any drone. I had a Borla system on a 97 Trans Am years ago and the drone was terrible...
If the trans and transfer case are indeed synthetic I would leave them alone. But the since the diff's are not syntheic I would will probably do them. Mobil 1 has a 75w90LS lube for limited slip. No need to add anything. I put it in my Corvette and it's working great not clutch chatter or...
Etorque would help for stop and go driving, the 3.92 may also help around town. Also losing weight will help MPG around town. Aerodynamics and 3.21 are you best bet at highway speeds.
Do not switch to 5w30! The engineers designed the engine for 5w20 and that's what you should run. It's a good possibility that those who develop HEMI tick might have been running the wrong oil IMHO.
Yes Synthetic will help. I run synthetic in everything I own.
I know one of the hedges...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.