Search results

i replaced all 4 door speakers in my truck with kicker 43DSC69304 3 way speakers. they are a 4 ohm speaker. after install i was impressed with the over all sound. i will say the integrated tweeters did absolutely nothing. so what ever frequency the factory h/k amp is set at is too low for them...

xy400a or xy640a

Aside from streaming boxes is there anyway to watch movies or mirror a iPhone on the screen? I purchased a magic box and it doesn’t work on the uc5 shows up but whenever I try to use it the radio seems to lock up. Sent from my iPhone using Tapatalk

the wiring for the tailgate module looks fairly straight forward. power ground and lin bus. it appears non multi function trucks don't have the lin bus wire in the tail gate/ bed harness. it is pin 6 on the tail gate module . orange and dark blue. It is used by a handful of modules in the...

depending what year the interior came out that might be the issue i know for the 25 model year they changed the module communication type. on the 19-24 their is a heated/ cooled seat module attached to the pass. seat and a memory module attached to the driver.

it will be a blue and violet wire out of connector c2 on the bcm pin k8 shows it goes into connctor xy340a (i believe that is the headliner harness connector on the right side of the dash. behind the ac vent

steering is good to go, all 1500's have electric assisted steering. Mine had the emergency braking when reversing. the abs module and valve assembly are different and still had to be changed.

did you purchase the mirrors new or used? sounds to me like your passenger mirror is not a memory mirror.

Unhook the battery and leave it disconnected for a couple of minutes. solved my problem.

no to the fuse. looked at some diagrams from pro demand and the wire is ran from the fuse box but terminates in the connector for the headliner harness( on the left side of the dash cluster area)

got everything all working today. while installing the plastic covers i noticed the windshield i got installed has lines for defrost like the back glass. what would be the process for hooking that up?

yes to both but not from the factory. The auto high beam use a different kinda light sensor that is attached to the rearview mirror if you don’t have fcw. If you do have fcw the dasm is used for it. I found some info out on used parts and part number be sure to check it out.

After doing some research on the used side of things model years 19,20,21 all have different part numbers and 22-24(possibly 25) used a different number. 19:68320948AF( n ) 20:68454267ac 21:68475159AE(f,g) 22-24: 04672891AB(c) I was having issues with communication on 22-24 module in my 2020...

Abs yes,align no. Unless I misunderstood the pdf thought it said I should only have the fcw off error.

OK, got to stopping point to double checked all my connections verified that I do have power and ground at the DASM verified I have can high going to Pin 6 and can low to pin 7 on the dasm I do not have any stored fault codes in the BCM. But still getting a ACC/FCW UNAVAILABLE SERVICE REQUIRED...

I got the windshield installed today. Played with trying to get the DASM hooked up, but for some reason cannot get it to communicate or I am assuming that it is not communicating. I have my power ran to pin number one ground ran to pin number Four can high on six and can low on seven. I could be...

okay thank you. for future reference part number for valance pieces the number with the CH's is the aftermarket part number for those on a budget. single exhaust: 68404394aa and 68404395aa (ch1147112/ch1146112) dual exhaust: 68404392ab and 68404393ab (ch1147108/ch1146108) park sensor...

i recently purchased most of the parts to do the swap. the acc switch is currently on b.o. through fca forewarning y'all, lucky for me i have a not so pretty one to get me by for testing purposes . my local dealer friend said 9 in the country and only dealers have them. but can someone shed some...

can you elaborate on how you got them to reprogram and can you tell if they vary from year to year/ trim level. looking to complete the dasm retrofit only write up i found said you had to use new abs pump assy and new dasm.

hopefully the dealer got this resolved for you. but it could be a one or mulitple modules acting funny on the CAN communication lines. their is multiple modules on one communication line if one out of the 5 or 6 on it is putting out weird signals it could make the rest of the modules on the same...