Search results

Come check out our options for OEM radio upgrade. Our units integrate better than aftermarket units as they are OEM that came from higher trim trucks. WE have plug and play kits for 8" or 12" radio upgrades. Either Uconnect 4 or Uconnect 5 upgrade. Feel free to reach out to our Advisor team to...

Are you referring to the charging USB in the top center console? Picture for clarification. There is no direct fuse for just a single USB hub. If it has died, try cleaning it out with 90% isopropyl alcohol.

This would require a bezel upgrade and some programming changes, adding cabin sensor, and you should be good to go.

I don't know what radio you have as I can't see part number but the Uconnect 4 and 5s both came with maroon and red fakras. I am correct in the color of what they are intended for but it depends on the radio and year it was made to know what your unit has. 5th gens do come with digital backup...

That is a maroon fakra, typically for wifi/phone/3G. Red fakras on older units was not used for diagnostic port. Later Red fakra became digital backup camera.

You can't update you unit to Poland maps on your own. You have two options. One replace the radio with an UGX which is the radio that would already have the correct firmware and maps you are looking for as its made for your location. Option two is go to Carperformance.se They have this wonderful...

90% isopropyl alcohol is safe for electronics as well as BW-100 is also safe as it evaporates quickly. You shouldn't need to remove the USB to clean it unless it is very badly packed with dirt some how. Give the USB hub a spray then plug in a connector over and over again. This will help clean...

T27.46 is the latest firmware for the Uconnect 8.5" and 12" systems.

If the radio is delaminating then you have a good change at making them replace it after warranty if you raise hell. I've seen it work more than a few times as they know their units have screen issues. If that fails we can fix what ever is wrong with the unit, it just takes sending us the unit...

Yes, we need the part number of the Uconnect module you are using. If you have the VIN of the donor vehicle that is helpful but not needed in most cases with the part number of the module. Its on the sticker of the module. Also go into settings and get the current build number.

It's a bug in their software. Hopefully Uconnect releases an update that corrects this issue.

Just get the same part number of your dead UAX module.

Did the vehicle have its radio upgraded? If that happened you would not get Uconnect services like SiriusXM Guardian but the built in navigation should work. If not maybe there is no GPS antenna, bad GPS antenna, or something wrong with the radio module.

Give the vehicle a few sleep cycles. When installing a Uconnect radio upgrade, sometimes audio doesn't work right off the bat. Now if this is your stock system and randomly you have no sound then there is an issue with that unit I'd image. Try doing an canbus reset and let us know the results.

Also sounds like a defective screen. What radio system did you have from factory? DM me your VIN so I can take a look at your factory build. You should have had navigation if you had an UBL. Uconnect 5 UBL module should allow a Uconnect 5 12" screen to work.

If not a screen protector then your screen is delaminating. This is where the digitizer is being released by the liquid crystal under the digitizer from the LCD. You can replace yourself if you have the skills just make sure to use a screen that won't delaminate again. LG made these screens and...

If you got the radio from a friend's truck, use their VIN when calling a dealership to get your radio code for free. They have to give it to you if you own the vehicle so you friend can get the code for you at a dealership or just purchase it online using the radio's Serial code.

We can find the update you are looking for. We just need your VIN if the radio is from factory, if you upgraded your radio then I'd need the part number and application number from the radio. Check out this post where we give a bit more details about the updating processes for Uconnect3,4,5...

The initial start up will allow the screen to work. After that or a sleep cycle the BCM doesn't know how to turn on the screen any more. You need to make some changes to the BCM's programming to let it know the screen and radio module are separated. This answer is all over the forums of what you...

We haven't starting to sell to HD yet but we do sell for the 1500. You aren't able to get Carplay maps to show up in the digital cluster far as we can tell. You can get the built in navigation from the radio to display in the cluster. You just need programming change to the BCM and to port the...