Search results

2021 BCM - 68496414AD https://www.detroitmopar.com/oem-parts/mopar-body-controller-module-68496414ad -=FM45=-

If you are talking about the gray (10) and black (16) connectors --- they connect to the rear seats to power the heat/vent options... -=FM45=-

Awesome PeePs.... great job !!! -=FM45=-

Another choice--- https://www.mycartrim.com/ -=FM45=-

Still add those settings with Alfa.... the soft buttons will be enabled... you'll have to enable the cooled also.... Also with those settings, when the temp is below 40, the drivers wheel and seat will turn with the remote starter... I know you are changing the clock spring, but you never...

Just a follow-up... finished installing 2 systems, 1 front camera only and the other-the dual setup... As far as loosing FM or interference --- all good on both vehicles... Will continue to test -=FM45=-

-- For any member looking to repair those door panel retainers that easily break ... around 10 bucks a box, qty 15 per.... in stock and the cheapest I could find... www.auveco.com -=FM45=-

I was asked about the pigtail that I used on MY19.... 3 wires and 2 diodes Hopefully the above pics clear up any questions and helps out any members taking on this mod... -=FM45=-

Just looking at your pics--- again just a guess but see XY331A and XY310A There are paid/subscription sites, ex. AllData... but as far for cost ??? Get friendly with a local shop and you might get lucky with needed info.. -=FM45=-

@brental1 --- not sure if you are taking advantage of any online resources but start here --- with all the rewiring you seem to be doing, this site should come in handy for any of your present and future mods ... http://connectors.dcctools.com/home.htm -=FM45=-

These are the connectors to look for, these a from Mouser but the OEM look exactly the same... -=FM45=-

I got an email from them asking for a pic of my factory mirror and shroud, sent my pic and within an hour or so they replied with a Thank You and that my order was being processed... I'm sure they are slammed with orders... sitting patiently ;) -=FM45=-

Just guess on the Black 5 pin SWITCH-ADJUSTABLE PEDALS MEMORY Pin Information Cav Circuit Gauge Color Function 1 Z912 0.35 BK GROUND 2 E12 0.35 OG/GY PANEL LAMPS DRIVER 3 Q102 0.35 OG/BU ADJUSTABLE PEDALS SWITCH FORWARD 4...

The standard courtesy system in the Ram uses halogen bulbs, the upgrade Led system uses three wires to power the 2 led package. --- one for courtesy the other ambient.. -=FM45=-

Hope this helps--- -=FM45=-

Just ordered Model A, if you use Subscribe5 -you will get an extra discount .... -=FM45=-

@vincentw56 -- you're are totally correct on the different configuration---coming home from a 36 hr shift, I rushed it without sleep. I edited my post. I hope a member or two can jump in and post some missing part numbers... -=FM45=-

Here is the write-up... just thrown together. Hopefully I didn't miss anything or make many mistakes, I was going off memory.. :) **** Make Note--- This is for the STANDARD tailgate w/o surround view **** -=FM45=-

Well I knew somebody spoke Mopar, @Jimmy07 ... thanks for the explanation, it should help out others wanting to add this mod. I know my color is MaxSteel but I keep calling it Blue... I need sleep-- ;) -=FM45=-

--- Just the 3 parts to make everything work, no other OE parts required... you will need 2 diodes and approx 2 ft of 22 gauge wire. All will be in my write-up.. This is my part number that I ordered for my vehicle. Maxsteel without chrome insert. For other colors start here--...