Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
When you install permanent valve solution you will loose a little bit of coolant during process. Can I just add any orange (Dexcool) or Mopar makes it's own coolant bland? Manual only mentions OAT coolant (antifreeze) (conforming to MS.90032)
Got mine installed today in the middle setting. Very happy with the planted feeling in the rear, definitely can feel the difference especially while doing 40mph wide turns. For reference, my available payload is 1,280lbs (full tank of gas, all addons, and myself included).
I just purchased Samsung s10e and after work discovered that if phone is in " do not disturb "mode it will not be discovered by uconnect or android car play. 8.4 non-nav.
Hmm, ok, I was not complaining at all, was just curious how it is in other states. I am far from politics and dont really care, just living a dream. Did not expect it to turn out this way but gained allot of valuable information and different points of view.
After reading you guys convinced me to jump on board and get one too. Question: should I spray paint Hellwing sway bar to match truck color? Will it add a cool factor? Or it will come off in short time and look ugly?
I dont have a "clicking" driver seat but my seat was wobbling or slightly moving around. In my case it turned out to be that one of the bolts was not torqued all the way and sit was rocking during turns, stops, and accelerations. May be check all seat bolts to make sure that they properly seated.
Get it towed, do not attemp to drive it. My wife's SUV had brake booster failure ones, brake pedal would go all the way with hissing sound and no brakes. I had so much fun replacing it and bleading an entire brake line but saved over $600 by DIY out of warranty.
Also keep in mind that max temp and pressure are all related. Most likely max pressure rating given at specific temp. As collant temp goes up max pressure rating drops.
Just be patient, take your time, remove front first, play it around, eventually it will come off. I struggled with it as well and eventually used flat screw drivers or similar tool to help creat movement between hose and plastic tube part.
Finally took truck to a dealer to perform 3 recalls and flash brake controller. In the end they charged me $75.
At First, when I called, I was given one hour quote or $150. Then when I came in person for scheduled appointment they quated me 1/2 hour $89 and said that they charge 190 an hour for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.