Search results

I bought the left side jumper.

Thankyou. That gives me something else to look at. Is it possible the body control module could cause one actuator not to work? I just checked for 12 volts at the new replacement rambox actuator wiring, and it is missing. It is supposed to have 12vdc all the time on that connector inside the...

So I replaced all of the rambox wiring and the jumper coming off the bed harness because the drivers side rambox button does not work on my 2020 Longhorn. I found a pretty melted plug and wires for the lock actuator jumper. After changing everything and cleaning up the pins on the existing...

Troubleshooting a nagging annoyance on my drivers side Rambox. The unlock button has never worked. It was not the lid or actuator because I took the lid off and plugged it into the other side and it works. So, I started looking at the wiring and found the main connector below the Rambox...

This is funny. I just took my 2020 RAM in to have the etorque changed for the whining whirring noise. After the tensioners and MGU were changed, the noise is still there. They also said it is normal and invited me to listen to another RAM. I guess I'll just be happy with new parts and ignore the...

So I have an annoying whine I can hear inside the cab on my 2020 RAM Longhorn. I had it diagnosed as the MGU, but I wanted to try changing this rough looking hydraulic tensioner first before dealing with the dealership again. I have a detailed OEM service manual, but I wanted to see if anyone...

Thankyou, I guess I don't have the correct trim tool. I tries a thin putty knife to get in there. Didnt work.

I have mopar part 82216265aa on my 2020 Longhorn I just bought. It feels welded tight. I cannot move it at all and tried everything you have tried. I'm not sure if it's broken, bent or just completely seized. Looking for a solution.

Hello, This is my first post. I just bought a gorgeous 2020 RAM longhorn and have been fixing minor things here and there. My drivers side Rambox button did not work and I chased it down to it being a wiring or button problem. I bought an an entire new lid from Mopar for about 90 bucks. Pretty...