Search results

Here is thread about it https://5thgenrams.com/community/threads/2021-night-edition-third-brake-light.24560/

Thank you guys for a detailed story on how DIY this mod. I ask you a couple more questions, - if I replace only the mirror glass without changing the case, can I connect the blind spot indicator with a some custom cable, and where exactly? - Replacing halogen taillights with led is...

I have the same gap on my Lonestar. But I think FCA made it to prevent creak noise while driving.

Hi, you are not alone here from Russia😉👍

A question to those who installed auto climate control, why does the AC indicator not light up in AUTO mode when it is turned on? In the heat, it blows cold, it means the AC is working, but the indicator is off. only lights up when I turn AC on manually, and AUTO turns off

There are 2 connectors behind the shifter, you could try unplug and plug it’s again, possibly the issue is loose contact. Not sure, but probably you can reach that coonectors if you take off lower dash panel under the steering wheel.

I understand correctly that the digital mirror does not work in 19-20 trucks?

ekaz: Thanks, will trying to connect through OBD2

Maybe is possible to install another camera, like 68417514aa? Sure the built one used by Chrysler not only in Ram chmsl.

I need to connect my aftermarket security alarm to CAN bus, the wires marked CAN-H and CAN-L. I know there is a CAN splitter under the dash driver side, but if anybody knows what type of connector i need and where exactly is CAN H and L?

Has anyone tried to install just rearview camera in a halogen CHMSL and OEM digital mirror? Maybe camera sold separately and will cheaper then LED CHMSL.

Post it in AlphaOBD thread, you will receive the answer faster. Also I could say, i use cheap SGW bypass, it connected to SGW module located under OBD harness. It stays there all the time, I don’t disconnect it.

Thank you very much! Now I am sure that I will connect correctly!

Perhaps the only thing I miss after went from Tundra is the storage for glasses on the ceiling. In Ram it’s only for one pair of glasses, and rather inconvenient. Has anyone installed an additional holder, preferably also on the ceiling?

As I know, square Lamps is LED and included with LED optick package, round is halogen, comes with halogens headlights and taile lights.

I haven't installed the power outlet yet, but according to the photo, the back of the console should be easy to remove.

Here is approx list, post#80 https://5thgenrams.com/community/threads/alpha-obd.11389/page-4#post-227519

Yes, I know, but could you share wiring diagram with cabin sensor pin numbers and wire colors on the AC to be sure right connection?

Disconnect battery for 30 minutes, see if that clears the code. Here that helped https://5thgenrams.com/community/threads/check-engine-lught-service-airbags.31249/#post-444541

Thanks, I'll try to connect with wires, as shown in the infotainment video. If it does not work, I will back to you.