Search results

Maybe this will help. I made it when I swapped power, heated, vented seats into my 2022 BH.

I'm not clear on the GR and WT wires. Do they go to CAN-C or CAN-IHS? Thanks, Brent

I have this one, with a cool jumper (I guess for standard or bypassed). The jumper wasn't included--but I can make that fairly easy. I'm not clear on the GR and WT wires. Do they go to CAN-C or CAN-IHS? Thanks, Brent

Now that I look at the letters, there are two. 63A/NHTSA 23V-059 and 97A/NHTSA 23V-654.

That's exactly what it is. I didn't even know that's a thing.

That's exactly what it is. I didn't even know that's a thing.

I'm tyring to determine if my truck already has a bypass cable installed. As you can see from the pic, there seems to be some kind of additional cable installed. It has a cable thal looks like coax that goes somewhere in the upper IP. I bought the truck new from a dealer. Does a dealer need...

Unbelievably, Fiat "gave away" the WT/DG and WT/OR from BCM C5/E and C6/F to XY400A in my truck, 2022 BH with Level 1 EQ. And the WT/DG and WT/OR are present on both halfes of XY400A. I don't know which connector they go to next. Do I need a rear bumper harness that includes the 2 fog lamp...

Months ago, I received a recall notice regarding the backup camera on my 2020. I still haven't taken my truck in for the fix. I've had no issues, so I haven't been motivated.

I got this far today. Used a drill to make the twisted pair for the CANBUS and it worked well!

I have a different situation; 2022 BH with Level 1 Equipment Group. I'm in the process of adding heat/vent rear seat to my truck. None of the required wires are present in my truck. I need to add 8 wires to XY435A (the connector for the Passenger side). 6 wires interconnect to XY430A...

22 BH with Level 1 Equipment Group. This is PART of what I had to do. Only the wires in Red were present in my truck. I could have built all the added wires into one harness. But I was so intimidated that I build two separate harnesses. Also had to change the clock spring to make the heated...

Writing this just to document my findings and maybe help my thinking. I found PK/BG F919 at both the seat connectors; XY410A Pin 4, and XY420A Pin 23. It seems to have just one feed--at XY330A under the center console. I had to splice it to feed both the seat connectors, above, when I...

I'm building harnesses and I'm stuck on one wire, so far. It's Pin 6 on XY435 A (Passenger Side) F919 PK/BU. I know it ultimately goes to Assy Power Distribution Center-Interior Pin 22. I can't find an intermediate connector. The same wire/circuit is at Pin 10 XY430A (Drivers Side). Do...

My notes are confusing to me now, a year later; But: Pin 1 is not shown on the list I printed. List starts with Pin 2. But, for some reason I decided I needed it. It's a RD/BL and I "spliced to PK/YL in truck" .Probably should have connected it to a Power Distribution Connector? It does not...

I;m almost there; but have 2 questions. I robbed the ambient light harness from a donor IP harness. It has 6 female and 1 male pin. I'm clear on 5 of the 6 female--2 to the courtsey/ambient footwell lights and 3 to the IP ambient lights. 1. But I don't know where the 6th female pin goes? 2...

I robbed the ambient harness from a donor IP harness. It has 6 female terminals. I know where 5 go-- 3 for the added ambient lights in the IP; 2 for the courtesy/ambient lights under the IP (footwell), and one male for pin 20A of XY370, 21 pin (for power). So I'm clear on all that. However, I...

I just tried to subscribe to rechauthority. Site is asking for a dealer code. Is there another way to get it? Thanks, Brent