Search results

That is correct they removed those from the wiring harness for some reason in the rear doors.

The wiring for the tube is behind the radio and then center one is behind the start button. if you have the one on the far left you have the other 2. :) The center one is the biggest pain to get undone. (sorry didn't notice at first that those were not your pictures) lol

yup! you got it!!!

The only thing I had to do on mine to make the tires not rub at full turn was to push in on the front of the liners where they bulged out. I only rub at full turn now if I'm in entry/exit mode. (which is almost never) lol

Does your truck with the air suspension have the offroad group? If not you're going to have to put a lvl lift on it. If it does 35's will clear. :)

So I finally got an installed that Ram Air on my truck. To my shock there is a noticeable difference in the responsiveness in the throttle. It also appears that I've gotten a small bump in fuel economy. I honestly only purchased it because I love the way they look and was hoping for slightly...

I felt inside it first. But I did have to cut and unwrap them out of the harness. What year and trim is your Ram?

Depends if you ordered with that option or not. 🤷‍♂️

I've been looking for the trailer brake controller, module and wiring. Does anyone here have the part numbers for these? The parts guy at the dealership says they don't exist yet but I don't believe him. Thanks in advance.

I have almost 16k on mine with about 6k of it towing with the mode on and I haven't had an issue. Sorry to hear you are though. :(

That's awesome!!!! Post some pictures! As far as your speedo, if it's that's close and shifting when it should I would leave it alone. It won't hurt anything at all.

Does anyone have pictures of the Mopar window vents on their truck? I would like to see if I want to go with those or the weather tech's when i replace my AVS ones.

Thanks jpesaturo! Your tires should have about the same poke as mine do. Make sure to post some pictures before and after the lift is installed! :) Don't forget to tag me.

I've used AVS windows visors in the past on almost all my other vehicles never had an issue. Put them on my new Ram and mine are doing the same thing. Warping in the middle both front and rear... Not happy and will be replacing them with the weather tech's.

Hi Crazydrive, The wheels are my factory 20" wheels. the M/T Baja Boss AT's 35x12.50r20 is the tire. they run around 34.5" tall. :) You can def run 35's as long as you stick with a 9" wide wheel with a low offset and higher back spacing around 5.75" :)

35x12.50r20 M/T Baja Boss AT no spacers no lift. no rub at full turn on aero/normal and offroad 1. very slight at full turn in entry/exit. Just had to push the bulge of the front of the liners in, did not require trimming.

The answer is no after further investigating... Looks like I have to wait, hope and pray that they will put these in the Rebels or other trims with the ORP. :( :( :(

I have the air ride so I think this is the one That might work with mine. 68376641AE does anyone know if the trailer height button toggles up and down?

You shouldn't need one with that small of a jump from the factory 275/55r20 if that's what it came with. How ever if you want one I would recommend the TAZER DT. It's got some fun features on it and is close to the same price as most standard calibrators.

Is there a way to make a custom splash screen using the Tazer DT? I know about the preloaded ones but would like to make my own. :) I haven't found anything on this yet. Thank in advance! :)