Search results

Take it apart again, clean it ( the circuit board and wiring points) with some electronic parts cleaner, preferably a spray can. Blow it dry as best you can. If you don't have any electronic cleaner or can't purchase any try cleaning it with alcohol. Use a small brush and just liberally apply to...

It’s all okay, those that are doing that are already “a few bricks short of a load”, so losing anything else won’t matter.;)

Checked mine just to be sure. As expected, it was there on both sides. Your’s either fell out or was never there to begin with! You can probably purchase and install yourself, but if it was my truck I would take it to the dealer and have it replaced under warranty. Your problem may go further...

Do yourself a favor and try to read up on all the leaking threads on this forum. There are a number of places on the truck that can leak. The fact that your dealer said they had never heard of it concerns me. You should be as well informed as possible so they get to the root cause (s) of your...

Nice! By the way, the paint code is on a sticker on the driver door frame. Nice photo setup,too.

I checked mine both ways for you. Rear seats both came on fine both in remote start or normal start. You obviously have some sort of problem with the rear driver side seat. Sorry, hope the dealership can fix it for you.

Sorry about your problems and hope it can be corrected soon for you. I have to ask though, can you explain how you used the Uconnect app to find out the problem? I didn’t know you could do that. Thanks

Yep, in the Texas heat, as well! Mine sits in sun all day. Only help is a good sunshade I use.

300000 and again you are implying that I don’t know that my a/ c is broke. Sorry again you have this issue but if as many out there are working right then it is not a figment of someone’s imagination. It just means they did not get yours right and it can be fixed.

The Hellwig is solid, the Ram is hollow, definitely going to have different torque characteristics. Would beninteresting to know if DS model was also hollow. I, by the way have no desire to change mine, I was just following the thread and was curious. I personally have not noticed any swaying as...

. Been there, done that, no matter what I say, you will still have a problem with “ your” truck.The point is, it is not all of the 300,000 2019 Rams made so far, which is exactly what you keep implying. Get your truck fixed or move on to another brand. FCA is not hearing you.

100 degrees here and my a/c is handling it fine. Auto, Recirc, set to 72. So, it can’t be all 2919 Ram trucks.

So just spit balling, if you could get a sway bar, from a 2018 Ram, it would probably be solid and might perform like the Hellwig for less cost?

How much does the Hellwig sway bar weigh and how much does the factory sway bar weigh? I think I saw a video which stated that the sway bars were purposely made hollow to save weight, which may also account for the difference in performance.

PWD

This problem is not specific to Ram, all vehicles with this feature are susceptible. You have to get power back to disengage the electric parking brake. Then you have a decision to make for the future, do you want to use the feature or not . You can turn off it occurring automatically, but...

Yes....

Check my message history. You will find some stating that I put seat covers on my front seats, this after having FCA replace front driver seat. I am not taking any chances. The covers I chose, at least do blend in with the frost interior. Not a perfect solution, just the way it is.

What part of Houston? What dealer were dealing with? What did the sales person/staff say? Did you mention your concerns? Did you ask them these questions? Inquiring minds would like to know?