Search results

From the my interface screen: Ram 1500 (DS/DX/DT) Radio Select control unit=Central vision processing module. Use MS-CAN BLUE adapter

I must be doing something wrong or missing a step. I'm following these steps but still cannot get a calibration screen for any camera. I am using OBDLink MX + and android (phone). I'm connected and start driving (2-5mph) I hit start and this comes up after about 2 seconds. I try to speed up...

Okay. So only seeing the rear cam is normal until you start moving and then hit calibrate?

Okay, I'll try it. Do you know when you saw the softkey for surround view. It's been a few hours and I don't see it.

I didn’t get this done yesterday. This morning,I made all the connections and programmed with Alfa. After programming, I could only see the backup camera. No softkeys or other cameras and no surround view in APPS. I turned off the vehicle and waited about 30 minutes, still nothing. I checked all...

Thanks. Hoping to finish this up today.

Does the CVMP plug into the old rear camera port on the head/radio unit?

Thanks. Working on this as we speak. Just needed to take a break to get this question answered!

Got it but we are reusing the cable from the old backup camera correct?

To those who have completed this mod, are we reusing the old backup camera cable and using this "1 of 3' Fakra Z - Male to Female https://www.amazon.com/dp/B07P2WYP98 - Tailgate Camera Adapter" to connect the new 360 camera to the old cable? TIA

To those who have completed this mod, are we reusing the old backup camera cable and using this "1 of 3' Fakra Z - Male to Female https://www.amazon.com/dp/B07P2WYP98 - Tailgate Camera Adapter" to connect the new 360 camera to the old cable? TIA

Thanks! That's that part I wasn't sure of.

Got that part. Do I keep the SGB in or do I just put in MX+?

Getting ready to tackle this mod. I have all the parts and know what settings to change in AlphaOBD but can someone tell me the process of calibrating the cameras? Do you have to have the SGB and OBDLink MX+ present with the car running to calibrate? Thanks!

Just an FYI for anyone with a 2022 Bighorn (maybe all 2022 year models?). The XY310 connector is held to the plastic bracket by slide on rails. Unfortunately for me, I though it was held on by a christmas tree and used a trim removal tool to try and pry it off. The rails broke off the connector...

Okay. I found that this is connector XY310. Any help on how to remove this from the plastic bracket or how to pin it if it can't be removed?

I snapped this pic while I was adding tow hooks This may the part # you are looking for. Edit: Nvm seems like you already went to the dealer.

I am adding front and rear park assist to a 2022 BH. I am trying to pin the connections under the drivers side firewall. I believe this is one of the connectors I need to pin. I was able to seperate the two halves but how do you get the connector off of the bracket? Half of the connection sits...

This is the front, back and side view of the spacer attached to the camera

Sorry guys I did not see any markings on the inserts.