Search results

I went the OEM way... you do have to remove the old light assembly and connector; install the new factory assembly, new connector, and an extra wire for the ambient side of the light... i added one under each side of the dash and one under each side of the front seats in the factory locations...

For those of you who wanted or were thinking of adding auto HVAC to your ride it is possible. I followed the posted video and just adapted it for the 8.4 radio. I needed to install the two sensors and change my radio shroud to have the Auto HVAC buttons. The final step was to add the function to...

AlfaOBD for pc or android, gateway bypass, and a OBDLink usb/bt module ... best bang for the buck--- -=FM45=-

You can start here--- https://5thgenrams.com/community/threads/colored-ambient-lighting-dash-and-doors.14274/ -=FM45=-

per the wiring ... pin 1 is ground, pin 2 is feed for the leds... on the non leds, pin 1 is feed and pin 2 is ground... -=FM45=-

On the premium LED Fogs... reverse the wires... same plug but wires need to be switched... -=FM45=-

Yes... in the bed... I will be doing a pdf write-up with details and pics... it would look OEM if FCA had made it an option.. LOL -=FM45=-

Added an extra 12 volts to the rear...

I actually just did the exact opposite, Old to New style.. The old style is only a two pin style, so you would just use the black and yl/vl .. tape off the wt/gr.. You will loose the ambient light feature with this setup tho.. also you will have to replace connector and pins as they are not...

Another shout out to Swifty on his leg work to even making this possible, Thanks Bud!! All my harnesses and accessory add-ons are finally being delivered, but slow going because of the present day situation. Not only am I adding passive entry, I am also installing OEM ambient lighting to each...

Alpha updated -- 2.1.9.0 pc & 2.1.7.9 droid -=FM45=-

2.1.5.0 is re-posted on the alfa site... -=FM45=-

Digging thru some older files that I got on 4 different servers... I have to have an older version.. Stand-by... *** I just found 2.1.4.0 --- pm for link -=FM45=-

I Believe 2.1.6.0 was last version that didn't officially support DT and above... -=FM45=-

Gotcha-- my mistake... the offer stands for ANY member needing an older version for testing... pm away\ -=FM45=-

@Konrad... I have Alfa 2.1.6.0 for pc if you want to try an older version... pm for link -=FM45=-

Dude you are awesome!!! I need to buy you a COLD one.... -=FM45=-

Again, YES, Thank you... -=FM45=-

PM sent...

Been following the passive entry thread for a while, if you have a chance could you add me to the list... VIN 1C6SRFFT6KN736828 Also when you got time could you post or pm parts needed to complete project... If there is any cost to add my VIN on your end let me know and we will take proper...