Search results

Did you add the heat/vent to your rear seats? I just swapped a reclining rear seat into my truck. The recliner has heat pads; so not a lot to add to make it vented also. But, the seat seems to be well sealed. Wondering if I need to cut 'vents' for the blowers, or if there's enough leakage...

I have a 22 Big Horn. It came with cloth seats. They seemed comfortable; although only one road trip with them. I HAD to have leather; so I swapped in a set of Laramie leather seats. This doesn't sound possible; but as soon a I sat in the Laramie seats, I noticed I sat lower in the truck...

Thanks, are the 'square' one (right side of pic) and 'angled' one (left side) all that are required? Or, is there another one out of the picture?

Any one have the PN or Description for the "bars mounted to rear of cab ..."?

I'm in the process of buying a reclining back seat. Do you have the PN and/or the Description for the new striker/ and are two parts required; one for the 60 and one for the 40? Also, were you able to find the required floor holes just by removing plugs? Did the installation require...

Did you get your question answered about the 2nd dimmer wheel? Did you get a PN?

You're right. The only thing I need 12V for is my cooler. I don't like the power cord running from the top of the IP to the cooler. Of course I could live with it; but it bothers me enough that I'm adding another 12V in the console to be able to more the cord out of the way.

Did you install them; and were you able to get them to work? My Mercedes has rear fogs (built into the tail light-driver's side only) and I'd like to have these on my Ram 1500 too.

Understand now. There is no existing 12V in this area--the only 12V is in the top of the IP. I'm adding one, and just set it in place where I am considering locating it. (There are no 'cutout outlines" for a 12 V like there was for the 115 Volt; so I guess the developers considered having...

Don't understand what you mean by "opposite"?

I just added a 115V outlet to the front of my center console. Pictures 1 and 2 are from the 'hidden' side of the panel showing the area marked for the cutout. 3 and 4 show the visible side with the cutout made and the outlet installed. I'm trying to decide where to add an additional 12V...

Thank you. I bought this panel ,used, to add to my truck. I don't know what year it came from; but I thought the USB symbol on Port 3 indicates it's a data port? If so, maybe earlier years had rear data? Also there are 2 USB connectors on the back of the panel. They are keyed opposite. I'm...

Thanks. However, I already bought 68523474AA with has provision for heated/vented rear seats and 115V outlet; but it did not include the USB cable. I was looking for the USB cable only. Don't really want to spend another $90+ for 68387136AB just to take the USB cable out of it--especially...

Does anyone have a PN for the "interconnect" cable to connect the rear USB jacks to the front. I don't know if it has to be an OE part number. Maybe just a generic USB connector cable.

I just added the USB/`12V panel to the rear of the console in my 2022 BH with Level 1 Equipment Group. 1. Although the OR/GY-PANEL LAMPS DRIVER and YE/BU-READING LAMPS DRIVER wires were both present in Pins 6 and 7 of XY360A the USB panel does not light up. What am I missing? Is a USB cable...

Just a part of the answer. Make sure you have the RD/GN wire in pin 3 and the OR/DB wire in pin 5 of XY360A (body side), the console connector. Both these wires split inside the console harness and a branch of each goes to both the Heated Seat Switches (L and R). The OR/DB originates at pin...

Yes, the 10 and 16 pin connectors. I was asking, specifically WHAT do they plug in to. Doesn't seem they plug into the MODULE-SEAT COMFORT CONTROL-REAR. 4 connectors for it are C1, C2, C3 (5 pin connectors) and C4 is 8 pin. Or, are there harnesses with branches that connect the 10 and 16 pin...

I'm more confused now. I don't understand what these 10 and 16 ways plug in to? I can find only 4 connectors for MODULE-SEAT COMFORT CONTROL-REAR C1, C2, AND C3 are 5 pin connectors C4 is 8 pin. Are there harnesses with branches that connect the 10 and 16 pin connectors to the four connectors...

Bump, anyone have PN information?