Search results

I got this far today. Used a drill to make the twisted pair for the CANBUS and it worked well!

I have a different situation; 2022 BH with Level 1 Equipment Group. I'm in the process of adding heat/vent rear seat to my truck. None of the required wires are present in my truck. I need to add 8 wires to XY435A (the connector for the Passenger side). 6 wires interconnect to XY430A...

22 BH with Level 1 Equipment Group. This is PART of what I had to do. Only the wires in Red were present in my truck. I could have built all the added wires into one harness. But I was so intimidated that I build two separate harnesses. Also had to change the clock spring to make the heated...

Writing this just to document my findings and maybe help my thinking. I found PK/BG F919 at both the seat connectors; XY410A Pin 4, and XY420A Pin 23. It seems to have just one feed--at XY330A under the center console. I had to splice it to feed both the seat connectors, above, when I...

I'm building harnesses and I'm stuck on one wire, so far. It's Pin 6 on XY435 A (Passenger Side) F919 PK/BU. I know it ultimately goes to Assy Power Distribution Center-Interior Pin 22. I can't find an intermediate connector. The same wire/circuit is at Pin 10 XY430A (Drivers Side). Do...

My notes are confusing to me now, a year later; But: Pin 1 is not shown on the list I printed. List starts with Pin 2. But, for some reason I decided I needed it. It's a RD/BL and I "spliced to PK/YL in truck" .Probably should have connected it to a Power Distribution Connector? It does not...

I;m almost there; but have 2 questions. I robbed the ambient light harness from a donor IP harness. It has 6 female and 1 male pin. I'm clear on 5 of the 6 female--2 to the courtsey/ambient footwell lights and 3 to the IP ambient lights. 1. But I don't know where the 6th female pin goes? 2...

I robbed the ambient harness from a donor IP harness. It has 6 female terminals. I know where 5 go-- 3 for the added ambient lights in the IP; 2 for the courtesy/ambient lights under the IP (footwell), and one male for pin 20A of XY370, 21 pin (for power). So I'm clear on all that. However, I...

I just tried to subscribe to rechauthority. Site is asking for a dealer code. Is there another way to get it? Thanks, Brent

My problem is that there are no existing wires in my truck for rear heat/vent. If the junkyard would have given me the front portion of the harnesses, with the connectors intact (that plug in around the IP) I would have known what to do. I called back and requested a quote for the front part...

This week, I bought a heated/vented/reclining rear seat. I already have one that's heated/reclining. I bought most of the parts to add vent to it. I was stumped on how to install the vent bags. After seeing the one I just bought, I see that the vent bags attach at the bottom/back of the...

Thanks for the instructions. Don't think I would have ever figured out where to mount it, without these. I 'robbed' the wires and connectors for this option from a donor harness. Tried to install the inverter module today. I removed the radio. I installed 3 speed nuts in the "frame" for...

Yeah, they were really sneaky by "giving away" half that B+ wire and deleting the other half! I contacted Jimmy07 this week. He said he could "probably" build the 2 harnesses for the rear seat. (I bought 4 sets of the 2 connectors {16 pin and 10 pin] and told him I can supply the...

More info: I'm trying to add both Rear Fog Lamps and Remote Proximity Keyless Entry (Passive Entry) to my truck. Only 2 PNs had both these oprions. 68360451AD is the cheaper one because it has [Parksense Ft/Rr Park Assist w/Stop]. [REAR FOG LAMPS], [Remote Proximity Keyless Entry]. 68358060AD...

FRONT: I was able to get the front heated/vented, the power passenger, and the heated steering wheel working by transplanting about 30 wires from the donor harness to my truck. While I didn't install the Memory switch in the door, I did have to run about 6 (of the 30) wires to the seat module...

See my earlier post. The large red wire (I don't remember the pin number; but think it's one of the corners) was present in my yellow connector under the passenger seat. So, I assumed there was B+ to it. But, for some reason, Fiat deleted an intermediate wire. Follow the seat harness from...

That feature is not very convenient. You have to "hunt" for the release cables.

I had to order the angled strikers and bolts (one bolt per striker). See my post above.

I swapped the reclining seats into my 2022 BH.. They don't recline as much as an airplane seat. More of a gimmick. Nice to brag that I have them; but not much benefit.

Thanks. I don't know what the FS section is. Is it a tab on this site?