Search results

2021, 103,000 miles, completely stock. Had a glow plug replaced under warranty and had a P00AF code popup and clear itself once. It's been a great truck!

Weird that clicking the links takes you to the same page since each link has the correct product IDs in it. I redid the second one and it seems to be working now.

If you want to go the OEM route, used ones go for around $100 on the forums. Lots of guys pull then out when they install some of the options shown in this thread. If you are installing the OEM storage in a truck that didn't have one you may need the seat bracket covers too. They might be...

The OEM design fits between the wheel wells so when used behind, or in front, of them there are large holes between it and the bedsides. It's pretty easy to work around by putting larger items on the outside ends and smaller items in the middle but it is worth noting. The 2018 I had had ram...

I have a similar cover on my non-rambox bed and used the OEM bed divider, I cut the rails sort to clear the box at the front of the bed then notched the brackets for the bed divider to clear the bed cover's clamps.

If anyone is interested in an OEM install check out these threads. Another option to the kit mentioned previously is to buy the OEM lights and the harnesses used when the lights are installed by the factory. I think this route is a little cheaper and you don't have to pull the wire all the way...

Do you have the center console or a jump seat? I'm not sure if the jump seat is an option on the Limited. I have a 2021 Limited with the center console and went with the Tuffy Console safe through Amazon. It is pretty solid and feels like it wouldn't be easy to pry into. It takes up the rear of...

I bought one of these, the bottle still falls over during spirited driving, but does alright most of the time. Oversize cup holder on Amazon I saw the SKT insert but like having the bottle sit low in the deep section and keeping the cup holders on the sliding tray open for cups or other stuff.

Here's the thread Nascar Tommy is referring too. I went this route on my 2021 and I agree with Nascar Tommy that it was easier and less expensive than the Mopar kit. Rather than running a wire the length of the truck you only have to replace a few feet of wiring at the back of the truck to each...

As mentioned by n8zcc, first figure out if they are Mopar steps or not. There are several aftermarket options some of which are installed by the dealer. Check the boards and hinges for anything identifying the manufacturer, check in the door jams for magnets and switches, look under the dash...

Hi there, I can confirm the rear door lock handles stick up higher than the front door's. I presume that's because there aren't any lock/unlock buttons on the rear doors, and they don't unlock on their own when pulling the inside door handles.

That list of icons are the different menus displaying info in the center section of the cluster. The truck icon shows vehicle related info in the center area. Right now you've got tire pressure visible. Using the left and right arrows on the left side of the steering wheel will show you other...

It looks like you are coming from a Hemi, I'd suggest taking the EcoDiesel for a long drive first. It has plenty of power but it comes on differently than a gas engine. There is no instant gratification when you punch the little pedal to the floor. I owned a 2018 Eco for 4 years and 120k miles...

No, I bought a used set of boards and the seller had all the harnesses but didn't have the gray connector.

I don't know about the wiring harness, E in the picture, but the connector, F in the picture, can be ordered from Mouser Electronics. I tried ordering the connector through a few dealers and it was only available as part of the larger wiring harness for a few hundred dollars. Gray...

Which recall, the HPFP? Was any other work done at the same time? I didn't think that replacing the HPFP involved any work on the top of the engine but I haven't looked for the procedures either. Maybe draining the oil is part of it, if removing the HPFP exposes internal areas of the engine? I...

They are the rails for the factory bed divider. https://store.mopar.com/oem-parts/mopar-cargo-bed-divider-82215481

Looks like on Fitcamx's website. https://fitcamx.com/

A 2023 with 6000 miles, sounds like it’s under warranty so I’d take it in to the dealer. Sure, you can make sure the sensors in the bumper are clean and that the battery terminals are tight but I wouldn’t dig into it too far. I had a similar issue on a Ford Expedition that turned out to be a...

For anyone looking for the two connectors that go to the control box under the dash, they can both be ordered from Mouser. Black: https://www.mouser.com/ProductDetail/Yazaki/7283859930?qs=yqaQSyyJnNiHvKWDU4HgCQ== Gray...