Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi All,
If you have the rough country "sport" fender flares post your pictures please :) I searched for a while but did not find these specfically.
https://www.roughcountry.com/product/configurable/rc-ram-sport-fender-flares-s-d10914c
I am looking for something that covers just a little more...
I took it apart, again, this weekend, cleaned all the fitting threads. I added loctite 569 to all the threaded fittings to the blocks, hoses to the fittings, and anywhere fittings threaded in, re-assembled, let it sit for a day before starting the truck up and no more leaking as of today.
The...
I'm curious, they must've resized something, the previous O-Ring sizes were -230 and -217, new one is listed as -230 and -124 in the manuals. So the center locking nut o ring must have been sized up actually?
Dash Number124
Width3/32
ID1 1/4
OD1 7/16
Dash Number217
Width1/8
ID1 3/16
OD1 7/16
I checked again today and the pressure sensor is clean, no leaks from there.
I still see the leak from the top part of the housing and also from the fittings.
Not really sure what more I can do to fix it.
I cleaned all the residual oil that may have dripped during the removal process, got back under the truck today and I can still see a small drop of oil forming around BOTH fitting threads, so I may have fixed one leak, but possibly created/discovered another.. I will retighten the fittings, but...
I got under the truck today and removed the kit.. I forgot how uncomfortable it is in there.
When I took the mount off, the original o-rings were flat and very stiff (crystalized). I replaced them with the viton ones from Amazon and hopefully it won't leak for the life of the truck anymore...
I found the leak coming from the top o-ring, on the part that mounts to where the OEM filter would go. The o-rings that came with the pacbrake kit are -217 and -230 Buna-n, with a shore rating of 70.
I ordered replacement ones made of Viton and 75 shore rating (slightly stiffer/harder). The...
I have rough country 5 inch lift + 1 additional inch using air suspension links, with fuel blitz 22x12 -44 offset wheels and 37x12.5 ridge grapplers and had to trim a lot. The metal pinch weld is half gone on my truck, the front valance was trimmed, the wheel wells were trimmed and bolted back...
Replacing it to a UC5 is a PITA and almost not even doable..
Replacing with a phoenix aftermarket android radio is easy.
P.s - looks like infotainment.com has released an easier to install drop-in upgrade kit to upgrade to the UC5.. when I last looked into this there wasn't anything of the...
After 3-4 years running the pacbrake relocation kit I've started to notice a small leak coming from the top where it mates to the original threads. I haven't seen anything on my driveway so it's gotta be tiny or maybe just under pressure when the engine is running. Anyone seen this on their...
Pinch weld is down to 1 bolt from the original 2 🙃, trimmed it by half .. with the revel links It's a little bit stiffer but not too bad, i normally leave it in normal all the time and drives like any regular truck would i suppose.. i can actually drive around in Aero (which would be closer to...
There's a setting somewhere that allows you to change the parking sensor volume and beep source (can be an annoying buzzer on the unit itself or through your speakers).
I'm running 37s, on 22x12 fuel blitz (-44 offset). My truck has the 3.92 gears and a 5 inch RC lift with additional 1" through revel links. There's plenty of power, I don't have any issues getting up to speed or passing or anything, it's actually faster than my wife's turbo SUV. mpg is about 12...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.