Search results

Set ride height level is the same thing as using the switch to change the level. Except you’re doing it via computer for diagnostic, etc. purposes. It is not a permanent change.

When I did the adjustment I didn’t save my stock settings either. I just plugged in some numbers, I think 130 for the front and 70 for the rear. And then measured each wheel well and adjusted accordingly. To get it level and the height I wanted. Never could get it back to the stock height. But I...

I nave a question about the air ride suspension and the Off Road Package. I know the ORP sits an inch higher in normal mode and only has one off road setting as opposed to the Non-ORP models. I also know using AlfaOBD you can set your truck to the ORP. My question is are there any physical...

The first dealership I went to in order to have the calibration done said that all cameras on all trucks are out of alignment and told me they’re not going to do anything about it. I’ve moved on to a 2nd dealership and we’ll see what they tell me. I’ll keep y’all posted.

Before I started adjusting the airbags with AflaOBD I used adjustable links to level the front end. So I never really had the 35s on there without the level. But I’m guessing there would be hardly any clearance without a level and definitely you’d have a lot of rubbing. I have the ORP and...

Did anyone ever find a resolution to this? I had both mirrors replaced for the same thing and the dealership has calibrated it twice and the side cameras still do not line up. They’ve now told me that this is normal and two brand new trucks on the lot had the same distortion.

Did you ever figure out how to calibrate your cameras? Or figure out the warping issue?

Now that’s not too bad. I could live with that. Just slightly off. Mine has a significant difference. Thank you. I’m going to go back and insist it gets fixed.

I wonder how this compares to the GT exhaust. I like the sound of it but am concerned about drone. But for the difference in cost it may be worth it.

Is it as far off as the picture I posted of mine?

Thanks. I checked out that thread. There’s a couple pictures in there that show them appearing to line up correctly. And a couple that are slightly off. I’m still kind of uncertain. Can anybody verify if their images look like mine if there parked between two parallel lines that run the entire...

Hoping y’all can help me out. I recently bought a 2019 Limited from CarMax. Under their warranty I had both exterior mirrors replaced as the gears were stripped. After CarMax replaced the mirrors and had the RAM dealership calibrate the 360 Surround Cameras the the top down view does not align...

If that’s your truck in the picture you have LEDs. You can’t swap bulbs in the taillights. You’re gonna have to add additional reverse lights.

The taillights are a sealed unit. You cannot swap bulbs in them. You’d have to do a reverse light modification. And add additional lights. There’s several threads on the subject if you do a search.

I’ve reached out weeks ago. They just wanted my registration information. And then fell off the face of the earth.

So I finally got it working. Thank you for all your help. The problem was it wouldn’t calibrate the height sensors when I tried lowering it to anything less than a 1” over stock. 1” made it ride too rough anyway. So I reset it back to 1” over and just lowered it to Aero mode. Which lowered it...

I was able to get the truck to raise about two inches. However I had no values written before I started making changes so do not have the factory ones. Does anybody by chance have their factory settings off a 2019 Limited with the off road package? At 2 inches the truck ride was terrible. I was...

Great. Thank you. I was able to get there. I’ve been reading several threads on what values you enter. I’ve tried running the calculations but I’m just not that smart. I’m not really sure how to raise each airbag by one inch. Anybody done this before and have some step by steps?

Can you tell me how you get to this location? I am in The suspension menu. Using windows. I do not see an option to “set the height of the suspension”.

So I already have daystar spacers in the front. And adjustable links in the front. I have the off-road package so the truck sits stock at 1” lift. The links are as short as they can possibly be to level the front end. I’d like to lift the entire truck one more inch above where it’s at now. Which...