Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have one. Looked forever and couldn’t find it. Read on here it could be drivers wiper and noticed when wipers are on the squeak stopped, so that’s it. My truck is out of warranty and I know something needs replacing with the wiper assembly but I haven’t gotten around to taking it apart yet
I received a notice that the recall exists, but at this time there is no fix and I would receive additional communication once a solution is found. I guess it could be because they aren’t ready to service the 2022 yet?
So far it’s great for just being a single 10”. I just picked up a calibration mic and rta software, so once I get it all set up and really dig into tuning it should be pretty impressive all around
I haven’t liked the base 6 system since day 1 so I finally decided to do a little something. For the first time I decided to go with a dsp and eliminate all passive crossovers and dedicate an amp channel to each speaker. I used the pac interface along with the optical adapter to feed the alpine...
Are they still in the cluster, just not on the radio? That’s what happened to mine too. I tried the toggle Alfa and nothing. I factory reset the radio and they came back for about a day and then disappeared again. They are still there in the cluster, but not the radio
Well over the weekend the same nonsense started back up with Waze and maps, so the antenna is not the fix. But when I brought my wife’s wagoneer to the dealer for an oil change I was talking to the service writer and was telling her I had an issue when using Waze and she said let me guess...
Don’t do it. I did this on an old Chevy years ago. I made it about 5 miles before the hub let loose. Apparently the cv axle plays a pretty big part in the hub holding together. It was an expensive lesson that day. Many other parts were damaged when it happened.
Does anyone with access to wire diagrams have a way to see where the aux 1 and aux 2 camera wires terminate? The pins mentioned in this thread are populated at the radio module, but I’d like to find out where the other end is if someone is able to tell me
I don’t think the lvds cable is the issue. When I had the wrong one the screen wouldn’t even turn on. Not sure of the touch screen issue. The ICS setting I think is just for the 12.1”. Did your truck have separate temp controls for driver and passenger? You said basic, and you said single zone...
I ended up getting a hold of a WiFi/bluetooth antenna and the cable that goes from it to the double green fakra on the radio module. It immediately asked if I wanted to connect my phone to Bluetooth and then asked if I wanted to setup CarPlay. I’ve been using it without wireless CarPlay and it’s...
Double check the harness under the seat and make sure the pins are in the correct location and fully seated. If you say the left taillight works on the right, try communicating with it in alfa when the lights are reversed, just to rule out the taillight assembly.
Try turning the mirror indicators off in Alfa and test the bsm system with just the audio alerts. I had an issue with my mirrors and it shut the whole system down. When you said the mirrors don’t light on startup it might indicate that the problem is there.
Pedal commander was a disaster for me. Check out the banks pedal monster. It has safety features none of the others have. Definitely a superior product over what I’ve had before
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.